CVEdetails.com the ultimate security vulnerability data source
(e.g.: CVE-2009-1234 or 2010-1234 or 20101234)
Log In   Register
Vulnerability Feeds & WidgetsNew   www.itsecdb.com  

Foscam : Security Vulnerabilities

Press ESC to close
# CVE ID CWE ID # of Exploits Vulnerability Type(s) Publish Date Update Date Score Gained Access Level Access Complexity Authentication Conf. Integ. Avail.
1 CVE-2018-19082 119 Overflow 2018-11-07 2018-12-13
7.5
None Remote Low Not required Partial Partial Partial
An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ONVIF devicemgmt SetDNS method allows remote attackers to conduct stack-based buffer overflow attacks via the IPv4Address field.
2 CVE-2018-19081 78 Exec Code 2018-11-07 2018-12-13
10.0
None Remote Low Not required Complete Complete Complete
An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ONVIF devicemgmt SetDNS method allows remote attackers to execute arbitrary OS commands via the IPv4Address field.
3 CVE-2018-19080 79 XSS 2018-11-07 2018-12-13
4.3
None Remote Medium Not required None Partial None
An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ONVIF devicemgmt SetHostname method allows unauthenticated persistent XSS.
4 CVE-2018-19079 20 2018-11-07 2018-12-13
7.8
None Remote Low Not required None None Complete
An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ONVIF devicemgmt SystemReboot method allows unauthenticated reboot.
5 CVE-2018-19078 255 2018-11-07 2018-12-13
5.0
None Remote Low Not required Partial None None
An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The response to an ONVIF media GetStreamUri request contains the administrator username and password.
6 CVE-2018-19077 125 DoS 2018-11-07 2018-12-13
7.8
None Remote Low Not required None None Complete
An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. RtspServer allows remote attackers to cause a denial of service (daemon hang or restart) via a negative integer in the RTSP Content-Length header.
7 CVE-2018-19076 287 2018-11-07 2018-12-11
5.0
None Remote Low Not required Partial None None
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The FTP and RTSP services make it easier for attackers to conduct brute-force authentication attacks, because failed-authentication limits apply only to HTTP (not FTP or RTSP).
8 CVE-2018-19075 200 +Info 2018-11-07 2018-12-11
5.0
None Remote Low Not required Partial None None
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The firewall feature makes it easier for remote attackers to ascertain credentials and firewall rules because invalid credentials lead to error -2, whereas rule-based blocking leads to error -8.
9 CVE-2018-19074 284 2018-11-07 2018-12-11
5.0
None Remote Low Not required None Partial None
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The firewall has no effect except for blocking port 443 and partially blocking port 88.
10 CVE-2018-19073 78 Exec Code 2018-11-07 2018-12-11
9.0
None Remote Low Single system Complete Complete Complete
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. They allow attackers to execute arbitrary OS commands via shell metacharacters in the modelName, by leveraging /mnt/mtd/app/config/ProductConfig.xml write access.
11 CVE-2018-19072 264 2018-11-07 2018-12-11
3.6
None Local Low Not required None Partial Partial
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. /mnt/mtd/app has 0777 permissions, allowing local users to replace an archive file (within that directory) to control what is extracted to RAM at boot time.
12 CVE-2018-19071 264 Exec Code 2018-11-07 2018-12-11
4.6
None Local Low Not required Partial Partial Partial
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. /mnt/mtd/boot.sh has 0777 permissions, allowing local users to control the commands executed at system start-up.
13 CVE-2018-19070 78 Exec Code 2018-11-07 2018-12-11
9.0
None Remote Low Single system Complete Complete Complete
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. They allow remote attackers to execute arbitrary OS commands via shell metacharacters in the usrName parameter of a CGIProxy.fcgi addAccount action.
14 CVE-2018-19069 798 2018-11-07 2018-12-11
10.0
None Remote Low Not required Complete Complete Complete
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The CGIProxy.fcgi?cmd=setTelnetSwitch feature is authorized for the root user with a password of toor.
15 CVE-2018-19068 254 2018-11-07 2018-12-13
4.0
None Remote Low Single system None Partial None
An issue was discovered on Foscam Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The CGIProxy.fcgi?cmd=setTelnetSwitch feature is authorized for hidden factory credentials.
16 CVE-2018-19067 798 2018-11-07 2018-12-11
10.0
None Remote Low Not required Complete Complete Complete
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. There is a hardcoded [email protected] password for the factory~ account.
17 CVE-2018-19066 798 2018-11-07 2018-12-11
5.0
None Remote Low Not required Partial None None
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The exported device configuration is encrypted with the hardcoded Pxift* password in some cases.
18 CVE-2018-19065 798 2018-11-07 2018-12-11
5.0
None Remote Low Not required Partial None None
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The exported device configuration is encrypted with the hardcoded BpP+2R9*Q password in some cases.
19 CVE-2018-19064 255 2018-11-07 2018-12-11
10.0
None Remote Low Not required Complete Complete Complete
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The ftpuser1 account has a blank password, which cannot be changed.
20 CVE-2018-19063 798 2018-11-07 2018-12-11
10.0
None Remote Low Not required Complete Complete Complete
An issue was discovered on Foscam C2 devices with System Firmware 1.11.1.8 and Application Firmware 2.72.1.32, and Opticam i5 devices with System Firmware 1.5.2.11 and Application Firmware 2.21.1.128. The admin account has a blank password.
21 CVE-2018-6832 119 DoS Overflow 2018-07-09 2018-09-14
7.8
None Remote Low Not required None None Complete
Stack-based buffer overflow in the getSWFlag function in Foscam Cameras C1 Lite V3, and C1 V3 with firmware 2.82.2.33 and earlier, FI9800P V3, FI9803P V4, FI9851P V3, and FI9853EP V2 2.84.2.33 and earlier, FI9816P V3, FI9821EP V2, FI9821P V3, FI9826P V3, and FI9831P V3 2.81.2.33 and earlier, C1, C1 V2, C1 Lite, and C1 Lite V2 2.52.2.47 and earlier, FI9800P, FI9800P V2, FI9803P V2, FI9803P V3, and FI9851P V2 2.54.2.47 and earlier, FI9815P, FI9815P V2, FI9816P, and FI9816P V2, 2.51.2.47 and earlier, R2 and R4 2.71.1.59 and earlier, C2 and FI9961EP 2.72.1.59 and earlier, FI9900EP, FI9900P, and FI9901EP 2.74.1.59 and earlier, FI9928P 2.74.1.58 and earlier, FI9803EP and FI9853EP 2.22.2.31 and earlier, FI9803P and FI9851P 2.24.2.31 and earlier, FI9821P V2, FI9826P V2, FI9831P V2, and FI9821EP 2.21.2.31 and earlier, FI9821W V2, FI9831W, FI9826W, FI9821P, FI9831P, and FI9826P 2.11.1.120 and earlier, FI9818W V2 2.13.2.120 and earlier, FI9805W, FI9804W, FI9804P, FI9805E, and FI9805P 2.14.1.120 and earlier, FI9828P, and FI9828W 2.13.1.120 and earlier, and FI9828P V2 2.11.1.133 and earlier allows remote attackers to cause a denial of service (crash and reboot), via the callbackJson parameter.
22 CVE-2018-6831 77 Exec Code 2018-07-09 2018-09-11
9.0
None Remote Low Single system Complete Complete Complete
The setSystemTime function in Foscam Cameras C1 Lite V3, and C1 V3 with firmware 2.82.2.33 and earlier, FI9800P V3, FI9803P V4, FI9851P V3, and FI9853EP V2 2.84.2.33 and earlier, FI9816P V3, FI9821EP V2, FI9821P V3, FI9826P V3, and FI9831P V3 2.81.2.33 and earlier, C1, C1 V2, C1 Lite, and C1 Lite V2 2.52.2.47 and earlier, FI9800P, FI9800P V2, FI9803P V2, FI9803P V3, and FI9851P V2 2.54.2.47 and earlier, FI9815P, FI9815P V2, FI9816P, and FI9816P V2, 2.51.2.47 and earlier, R2 and R4 2.71.1.59 and earlier, C2 and FI9961EP 2.72.1.59 and earlier, FI9900EP, FI9900P, and FI9901EP 2.74.1.59 and earlier, FI9928P 2.74.1.58 and earlier, FI9803EP and FI9853EP 2.22.2.31 and earlier, FI9803P and FI9851P 2.24.2.31 and earlier, FI9821P V2, FI9826P V2, FI9831P V2, and FI9821EP 2.21.2.31 and earlier, FI9821W V2, FI9831W, FI9826W, FI9821P, FI9831P, and FI9826P 2.11.1.120 and earlier, FI9818W V2 2.13.2.120 and earlier, FI9805W, FI9804W, FI9804P, FI9805E, and FI9805P 2.14.1.120 and earlier, FI9828P, and FI9828W 2.13.1.120 and earlier, and FI9828P V2 2.11.1.133 and earlier allows remote authenticated users to execute arbitrary commands via a ';' in the ntpServer argument. NOTE: this issue exists because of an incomplete fix for CVE-2017-2849.
23 CVE-2018-6830 22 Dir. Trav. 2018-07-09 2018-09-10
6.4
None Remote Low Not required None Partial Partial
Directory traversal vulnerability in Foscam Cameras C1 Lite V3, and C1 V3 with firmware 2.82.2.33 and earlier, FI9800P V3, FI9803P V4, FI9851P V3, and FI9853EP V2 2.84.2.33 and earlier, FI9816P V3, FI9821EP V2, FI9821P V3, FI9826P V3, and FI9831P V3 2.81.2.33 and earlier, C1, C1 V2, C1 Lite, and C1 Lite V2 2.52.2.47 and earlier, FI9800P, FI9800P V2, FI9803P V2, FI9803P V3, and FI9851P V2 2.54.2.47 and earlier, FI9815P, FI9815P V2, FI9816P, and FI9816P V2, 2.51.2.47 and earlier, R2 and R4 2.71.1.59 and earlier, C2 and FI9961EP 2.72.1.59 and earlier, FI9900EP, FI9900P, and FI9901EP 2.74.1.59 and earlier, FI9928P 2.74.1.58 and earlier, FI9803EP and FI9853EP 2.22.2.31 and earlier, FI9803P and FI9851P 2.24.2.31 and earlier, FI9821P V2, FI9826P V2, FI9831P V2, and FI9821EP 2.21.2.31 and earlier, FI9821W V2, FI9831W, FI9826W, FI9821P, FI9831P, and FI9826P 2.11.1.120 and earlier, FI9818W V2 2.13.2.120 and earlier, FI9805W, FI9804W, FI9804P, FI9805E, and FI9805P 2.14.1.120 and earlier, FI9828P, and FI9828W 2.13.1.120 and earlier, and FI9828P V2 2.11.1.133 and earlier allows remote attackers to delete arbitrary files via a .. (dot dot) in the URI path component.
24 CVE-2017-7648 798 2017-04-10 2017-04-17
4.3
None Remote Medium Not required Partial None None
Foscam networked devices use the same hardcoded SSL private key across different customers' installations, which allows remote attackers to defeat cryptographic protection mechanisms by leveraging knowledge of this key from another installation.
25 CVE-2017-2879 119 Overflow 2018-09-19 2018-11-20
4.3
None Local Network Medium Not required None Partial Partial
An exploitable buffer overflow vulnerability exists in the UPnP implementation used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted UPnP discovery response can cause a buffer overflow resulting in overwriting arbitrary data. An attacker needs to be in the same subnetwork and reply to a discovery message to trigger this vulnerability.
26 CVE-2017-2878 119 Overflow 2018-09-19 2018-11-20
6.4
None Remote Low Not required None Partial Partial
An exploitable buffer overflow vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted HTTP request can cause a buffer overflow resulting in overwriting arbitrary data. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
27 CVE-2017-2877 264 2018-09-19 2018-11-20
7.5
None Remote Low Not required Partial Partial Partial
A missing error check exists in the Multi-Camera interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted request on port 10001 could allow an attacker to reset the user accounts to factory defaults, without authentication.
28 CVE-2017-2876 119 Overflow 2018-09-19 2018-11-20
6.4
None Remote Low Not required None Partial Partial
An exploitable buffer overflow vulnerability exists in the Multi-Camera interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted request on port 10000 can cause a buffer overflow resulting in overwriting arbitrary data.
29 CVE-2017-2875 119 Overflow 2018-09-19 2018-11-20
6.4
None Remote Low Not required None Partial Partial
An exploitable buffer overflow vulnerability exists in the Multi-Camera interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted request on port 10000 can cause a buffer overflow resulting in overwriting arbitrary data.
30 CVE-2017-2874 200 +Info 2018-09-17 2018-11-20
5.0
None Remote Low Not required Partial None None
An information disclosure vulnerability exists in the Multi-Camera interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted request on port 10001 can allow for a user to retrieve sensitive information without authentication.
31 CVE-2017-2873 77 2018-09-19 2018-11-20
6.5
None Remote Low Single system Partial Partial Partial
An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during the SoftAP configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
32 CVE-2017-2872 264 Exec Code 2018-09-17 2018-11-21
9.0
None Remote Low Single system Complete Complete Complete
Insufficient security checks exist in the recovery procedure used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. A HTTP request can allow for a user to perform a firmware upgrade using a crafted image. Before any firmware upgrades in this image are flashed to the device, binaries as well as arguments to shell commands contained in the image are executed with elevated privileges.
33 CVE-2017-2871 287 2018-04-17 2018-05-22
5.8
None Local Network Low Not required Partial Partial Partial
Insufficient security checks exist in the recovery procedure used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. An attacker who is in the same subnetwork of the camera or has remote administrator access can fully compromise the device by performing a firmware recovery using a custom image.
34 CVE-2017-2857 119 Overflow 2018-09-17 2018-11-19
9.3
None Remote Medium Not required Complete Complete Complete
An exploitable buffer overflow vulnerability exists in the DDNS client used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. On devices with DDNS enabled, an attacker who is able to intercept HTTP connections will be able to fully compromise the device by creating a rogue HTTP server.
35 CVE-2017-2856 119 Overflow 2018-09-17 2018-11-19
9.3
None Remote Medium Not required Complete Complete Complete
An exploitable buffer overflow vulnerability exists in the DDNS client used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. On devices with DDNS enabled, an attacker who is able to intercept HTTP connections will be able to fully compromise the device by creating a rogue HTTP server.
36 CVE-2017-2855 119 Overflow 2018-09-19 2018-11-21
9.3
None Remote Medium Not required Complete Complete Complete
An exploitable buffer overflow vulnerability exists in the DDNS client used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. On devices with DDNS enabled, an attacker who is able to intercept HTTP connections will be able to fully compromise the device by creating a rogue HTTP server.
37 CVE-2017-2854 119 Overflow 2018-09-17 2018-12-13
9.3
None Remote Medium Not required Complete Complete Complete
An exploitable buffer overflow vulnerability exists in the DDNS client used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.43. On devices with DDNS enabled, an attacker who is able to intercept HTTP connections will be able to fully compromise the device by creating a rogue HTTP server.
38 CVE-2017-2851 119 Overflow 2017-06-29 2017-07-05
6.0
None Remote Medium Single system Partial Partial Partial
In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can cause a buffer overflow.
39 CVE-2017-2850 444 Bypass 2017-06-29 2017-07-05
6.5
None Remote Low Single system Partial Partial Partial
In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary characters in the pureftpd.passwd file during a username change, which in turn allows for bypassing chroot restrictions in the FTP server. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
40 CVE-2017-2849 77 2017-06-29 2017-07-05
6.5
None Remote Low Single system Partial Partial Partial
In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during NTP server configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
41 CVE-2017-2848 77 2017-06-29 2017-07-05
6.5
None Remote Low Single system Partial Partial Partial
In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
42 CVE-2017-2847 77 2017-06-29 2017-07-05
6.5
None Remote Low Single system Partial Partial Partial
In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
43 CVE-2017-2846 77 2017-06-29 2017-07-05
6.5
None Remote Low Single system Partial Partial Partial
In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary shell characters during manual network configuration resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
44 CVE-2017-2845 77 Exec Code 2017-06-29 2017-07-05
6.5
None Remote Low Single system Partial Partial Partial
An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during the SMTP configuration tests resulting in command execution
45 CVE-2017-2844 77 Exec Code 2017-06-29 2017-07-05
6.5
None Remote Low Single system Partial Partial Partial
In the web management interface in Foscam C1 Indoor HD cameras with application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary data in the "msmtprc" configuration file resulting in command execution. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
46 CVE-2017-2843 77 Exec Code 2017-06-27 2017-07-03
7.5
None Remote Low Not required Partial Partial Partial
In the web management interface in Foscam C1 Indoor HD Camera running application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary data in the "msmtprc" configuration file resulting in command execution. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
47 CVE-2017-2842 77 Exec Code 2017-06-27 2017-07-05
6.5
None Remote Low Single system Partial Partial Partial
In the web management interface in Foscam C1 Indoor HD Camera running application firmware 2.52.2.37, a specially crafted HTTP request can allow for a user to inject arbitrary data in the "msmtprc" configuration file resulting in command execution. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
48 CVE-2017-2841 77 Exec Code 2017-06-27 2017-07-05
6.5
None Remote Low Single system Partial Partial Partial
An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary data in the "msmtprc" configuration file resulting in command execution. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
49 CVE-2017-2833 78 2018-04-24 2018-06-05
8.5
None Remote Medium Single system Complete Complete Complete
An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters resulting in command injection during the boot process. To trigger this vulnerability, an attacker needs to send an HTTP request and reboot the device.
50 CVE-2017-2832 78 2018-04-24 2018-06-05
9.0
None Remote Low Single system Complete Complete Complete
An exploitable command injection vulnerability exists in the web management interface used by the Foscam C1 Indoor HD Camera running application firmware 2.52.2.37. A specially crafted HTTP request can allow for a user to inject arbitrary shell characters during a password change resulting in command injection. An attacker can simply send an HTTP request to the device to trigger this vulnerability.
Total number of vulnerabilities : 62   Page : 1 (This Page)2
CVE is a registred trademark of the MITRE Corporation and the authoritative source of CVE content is MITRE's CVE web site. CWE is a registred trademark of the MITRE Corporation and the authoritative source of CWE content is MITRE's CWE web site. OVAL is a registered trademark of The MITRE Corporation and the authoritative source of OVAL content is MITRE's OVAL web site.
Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.