CVEdetails.com the ultimate security vulnerability data source
(e.g.: CVE-2009-1234 or 2010-1234 or 20101234)
Log In   Register
Vulnerability Feeds & WidgetsNew   www.itsecdb.com  

Siemens : Security Vulnerabilities Published In 2016

Press ESC to close
# CVE ID CWE ID # of Exploits Vulnerability Type(s) Publish Date Update Date Score Gained Access Level Access Complexity Authentication Conf. Integ. Avail.
1 CVE-2016-9160 254 2016-12-16 2017-07-26
5.8
None Remote Medium Not required Partial None Partial
A vulnerability in SIEMENS SIMATIC WinCC (All versions < SIMATIC WinCC V7.2) and SIEMENS SIMATIC PCS 7 (All versions < SIMATIC PCS 7 V8.0 SP1) could allow a remote attacker to crash an ActiveX component or leak parts of the application memory if a user is tricked into clicking on a malicious link under certain conditions.
2 CVE-2016-9159 200 +Info 2016-12-16 2018-01-24
4.3
None Remote Medium Not required Partial None None
A vulnerability has been identified in SIMATIC S7-300 CPU family, SIMATIC S7-400 V6 and earlier CPU family, SIMATIC S7-400 V7 CPU family. An attacker with network access to port 102/tcp (ISO-TSAP) or via Profibus could obtain credentials from the PLC if protection-level 2 is configured on the affected devices. This vulnerability affects all listed affected products.
3 CVE-2016-9158 20 2016-12-16 2018-01-24
7.8
None Remote Low Not required None None Complete
A vulnerability has been identified in SIMATIC S7-300 CPU family, SIMATIC S7-400 V6 and earlier CPU family, SIMATIC S7-400 V7 CPU family. Specially crafted packets sent to port 80/tcp could cause the affected devices to go into defect mode. A cold restart is required to recover the system. This vulnerability affects all SIMATIC S7-300 PN CPUs, and all SIMATIC S7-400 PN V6 and V7 CPUs.
4 CVE-2016-9157 20 DoS Exec Code 2016-12-05 2017-06-12
7.5
None Remote Low Not required Partial Partial Partial
A vulnerability in Siemens SICAM PAS (all versions before V8.09) could allow a remote attacker to cause a Denial of Service condition and potentially lead to unauthenticated remote code execution by sending specially crafted packets to port 19234/TCP.
5 CVE-2016-9156 20 2016-12-05 2017-06-12
7.5
None Remote Low Not required Partial Partial Partial
A vulnerability in Siemens SICAM PAS (all versions before V8.09) could allow a remote attacker to upload, download, or delete files in certain parts of the file system by sending specially crafted packets to port 19235/TCP.
6 CVE-2016-9155 284 2016-11-22 2016-12-22
5.0
None Remote Low Not required Partial None None
The following SIEMENS branded IP Camera Models CCMW3025, CVMW3025-IR, CFMW3025 prior to version 1.41_SP18_S1; CCPW3025, CCPW5025 prior to version 0.1.73_S1; CCMD3025-DN18 prior to version v1.394_S1; CCID1445-DN18, CCID1445-DN28, CCID1145-DN36, CFIS1425, CCIS1425, CFMS2025, CCMS2025, CVMS2025-IR, CFMW1025, CCMW1025 prior to version v2635_SP1 could allow an attacker with network access to the web server to obtain administrative credentials under certain circumstances.
7 CVE-2016-9154 332 2016-12-23 2016-12-30
5.0
None Remote Low Not required Partial None None
Siemens Desigo PX Web modules PXA40-W0, PXA40-W1, PXA40-W2 for Desigo PX automation controllers PXC00-E.D, PXC50-E.D, PXC100-E.D, PXC200-E.D (All firmware versions < V6.00.046) and Desigo PX Web modules PXA30-W0, PXA30-W1, PXA30-W2 for Desigo PX automation controllers PXC00-U, PXC64-U, PXC128-U (All firmware versions < V6.00.046) use a pseudo random number generator with insufficient entropy to generate certificates for HTTPS, potentially allowing remote attackers to reconstruct the corresponding private key.
8 CVE-2016-8673 352 CSRF 2016-11-23 2017-03-16
6.8
None Remote Medium Not required Partial Partial Partial
Cross-site request forgery (CSRF) vulnerability in the integrated web server on Siemens SIMATIC CP 343-1 Advanced prior to version 3.0.53, SIMATIC CP 443-1 Advanced prior to version 3.2.17, SIMATIC S7-300 CPU, and SIMATIC S7-400 CPU devices allows remote attackers to hijack the authentication of arbitrary users.
9 CVE-2016-8672 200 +Info 2016-11-23 2017-03-16
5.0
None Remote Low Not required Partial None None
The integrated web server on Siemens SIMATIC CP 343-1 Advanced prior to version 3.0.53, SIMATIC CP 443-1 Advanced prior to version 3.2.17, SIMATIC S7-300 CPU, and SIMATIC S7-400 CPU devices does not set the secure flag for unspecified cookies in an https session, which makes it easier for remote attackers to capture these cookies by intercepting their transmission within an http session.
10 CVE-2016-8565 284 2016-10-13 2017-07-28
6.4
None Remote Low Not required None Partial Partial
Siemens Automation License Manager (ALM) before 5.3 SP3 allows remote attackers to write to files, rename files, create directories, or delete directories via crafted packets.
11 CVE-2016-8564 89 Exec Code Sql 2016-10-13 2017-07-28
6.4
None Remote Low Not required Partial Partial None
SQL injection vulnerability in Siemens Automation License Manager (ALM) before 5.3 SP3 Update 1 allows remote attackers to execute arbitrary SQL commands via crafted traffic to TCP port 4410.
12 CVE-2016-8563 20 DoS 2016-10-13 2017-07-28
5.0
None Remote Low Not required None None Partial
Siemens Automation License Manager (ALM) before 5.3 SP3 Update 1 allows remote attackers to cause a denial of service (ALM service outage) via crafted packets to TCP port 4410.
13 CVE-2016-8562 20 DoS 2016-11-18 2016-12-21
3.5
None Remote Medium Single system None None Partial
Siemens SIMATIC CP 1543-1 before 2.0.28, when SNMPv3 write access or SNMPv1 is enabled, allows remote authenticated users to cause a denial of service by modifying SNMP variables.
14 CVE-2016-8561 264 +Priv 2016-11-18 2016-12-21
6.0
None Remote Medium Single system Partial Partial Partial
Siemens SIMATIC CP 1543-1 before 2.0.28 allows remote authenticated users to gain privileges by leveraging certain TIA-Portal access and project-data access.
15 CVE-2016-7960 200 +Info 2016-10-13 2016-12-22
1.9
None Local Medium Not required Partial None None
Siemens SIMATIC STEP 7 (TIA Portal) before 14 uses an improper format for managing TIA project files during version updates, which makes it easier for local users to obtain sensitive configuration information via unspecified vectors.
16 CVE-2016-7959 254 +Info 2016-10-13 2016-12-21
1.9
None Local Medium Not required Partial None None
Siemens SIMATIC STEP 7 (TIA Portal) before 14 improperly stores pre-shared key data in TIA project files, which makes it easier for local users to obtain sensitive information by leveraging access to a file and conducting a brute-force attack.
17 CVE-2016-7165 284 2016-11-15 2018-06-14
6.9
None Local Medium Not required Complete Complete Complete
A vulnerability has been identified in Primary Setup Tool (PST) (All versions < V4.2 HF1), SIMATIC IT Production Suite (All versions < V7.0 SP1 HFX 2), SIMATIC NET PC-Software (All versions < V14), SIMATIC PCS 7 V7.1 (All versions), SIMATIC PCS 7 V8.0 (All versions), SIMATIC PCS 7 V8.1 (All versions), SIMATIC PCS 7 V8.2 (All versions < V8.2 SP1), SIMATIC STEP 7 (TIA Portal) V13 (All versions < V13 SP2), SIMATIC STEP 7 V5.X (All versions < V5.5 SP4 HF11), SIMATIC WinCC (TIA Portal) Basic, Comfort, Advanced (All versions < V14), SIMATIC WinCC (TIA Portal) Professional V13 (All versions < V13 SP2), SIMATIC WinCC (TIA Portal) Professional V14 (All versions < V14 SP1), SIMATIC WinCC Runtime Professional V13 (All versions < V13 SP2), SIMATIC WinCC Runtime Professional V14 (All versions < V14 SP1), SIMATIC WinCC V7.0 SP2 and earlier versions (All versions < V7.0 SP2 Upd 12), SIMATIC WinCC V7.0 SP3 (All versions < V7.0 SP3 Upd 8), SIMATIC WinCC V7.2 (All versions < V7.2 Upd 14), SIMATIC WinCC V7.3 (All versions < V7.3 Upd 11), SIMATIC WinCC V7.4 (All versions < V7.4 SP1), SIMIT V9.0 (All versions < V9.0 SP1), SINEMA Remote Connect Client (All versions < V1.0 SP3), SINEMA Server (All versions < V13 SP2), SOFTNET Security Client V5.0 (All versions), Security Configuration Tool (SCT) (All versions < V4.3 HF1), TeleControl Server Basic (All versions < V3.0 SP2), WinAC RTX 2010 SP2 (All versions), WinAC RTX F 2010 SP2 (All versions). Unquoted service paths could allow local Microsoft Windows operating system users to escalate their privileges if the affected products are not installed under their default path ("C:\Program Files\*" or the localized equivalent).
18 CVE-2016-7114 287 2016-09-05 2018-03-22
9.0
None Remote Low Single system Complete Complete Complete
A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02; SIPROTEC 7SJ686 : All versions < V 4.87; SIPROTEC 7UT686 : All versions < V 4.02; SIPROTEC 7SD686 : All versions < V 4.05; SIPROTEC 7SJ66 : All versions < V 4.30. Attackers with network access to the device's web interface (port 80/tcp) could possibly circumvent authentication and perform certain administrative operations. A legitimate user must be logged into the web interface for the attack to be successful.
19 CVE-2016-7113 399 2016-09-05 2018-03-22
7.8
None Remote Low Not required None None Complete
A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02. Specially crafted packets sent to port 80/tcp could cause the affected device to go into defect mode.
20 CVE-2016-7112 287 2016-09-05 2018-03-22
10.0
Admin Remote Low Not required Complete Complete Complete
A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02. Attackers with network access to the device's web interface (port 80/tcp) could possibly circumvent authentication and perform certain administrative operations.
21 CVE-2016-7090 200 +Info 2016-09-29 2016-11-28
4.3
None Remote Medium Not required Partial None None
The integrated web server on Siemens SCALANCE M-800 and S615 modules with firmware before 4.02 does not set the secure flag for the session cookie in an https session, which makes it easier for remote attackers to capture this cookie by intercepting its transmission within an http session.
22 CVE-2016-6486 264 +Priv 2016-08-07 2016-11-28
7.2
None Local Low Not required Complete Complete Complete
Siemens SINEMA Server uses weak permissions for the application folder, which allows local users to gain privileges via unspecified vectors.
23 CVE-2016-6204 79 XSS 2016-07-22 2016-11-28
4.3
None Remote Medium Not required None Partial None
Cross-site scripting (XSS) vulnerability in the integrated web server in Siemens SINEMA Remote Connect Server before 1.2 allows remote attackers to inject arbitrary web script or HTML via a crafted URL.
24 CVE-2016-5874 20 DoS 2016-07-22 2016-11-28
5.0
None Remote Low Not required None None Partial
Siemens SIMATIC NET PC-Software before 13 SP2 allows remote attackers to cause a denial of service (OPC UA service outage) via crafted TCP packets.
25 CVE-2016-5849 200 +Info 2016-07-04 2016-11-28
1.9
None Local Medium Not required Partial None None
Siemens SICAM PAS through 8.07 allows local users to obtain sensitive configuration information by leveraging database stoppage.
26 CVE-2016-5848 255 2016-07-04 2016-11-28
1.7
None Local Low Single system Partial None None
Siemens SICAM PAS before 8.07 does not properly restrict password data in the database, which makes it easier for local users to calculate passwords by leveraging unspecified database privileges.
27 CVE-2016-5744 200 +Info 2016-07-22 2016-11-28
5.0
None Remote Low Not required Partial None None
Siemens SIMATIC WinCC 7.0 through SP3 and 7.2 allows remote attackers to read arbitrary WinCC station files via crafted packets.
28 CVE-2016-5743 20 Exec Code 2016-07-22 2016-11-28
10.0
None Remote Low Not required Complete Complete Complete
Siemens SIMATIC WinCC before 7.3 Update 10 and 7.4 before Update 1, SIMATIC BATCH before 8.1 SP1 Update 9 as distributed in SIMATIC PCS 7 through 8.1 SP1, SIMATIC OpenPCS 7 before 8.1 Update 3 as distributed in SIMATIC PCS 7 through 8.1 SP1, SIMATIC OpenPCS 7 before 8.2 Update 1 as distributed in SIMATIC PCS 7 8.2, and SIMATIC WinCC Runtime Professional before 13 SP1 Update 9 allow remote attackers to execute arbitrary code via crafted packets.
29 CVE-2016-4785 200 +Info 2016-05-30 2018-03-22
5.0
None Remote Low Not required Partial None None
A vulnerability has been identified in Firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02. The integrated web server (port 80/tcp) of the affected devices could allow remote attackers to obtain a limited amount of device memory content if network access was obtained. This vulnerability only affects EN100 Ethernet module included in SIPROTEC4 and SIPROTEC Compact devices.
30 CVE-2016-4784 200 +Info 2016-05-30 2018-03-22
5.0
None Remote Low Not required Partial None None
A vulnerability has been identified in firmware variant PROFINET IO for EN100 Ethernet module : All versions < V1.04.01; Firmware variant Modbus TCP for EN100 Ethernet module : All versions < V1.11.00; Firmware variant DNP3 TCP for EN100 Ethernet module : All versions < V1.03; Firmware variant IEC 104 for EN100 Ethernet module : All versions < V1.21; EN100 Ethernet module included in SIPROTEC Merging Unit 6MU80 : All versions < 1.02.02; SIPROTEC 7SJ686 : All versions < V 4.83; SIPROTEC 7UT686 : All versions < V 4.01; SIPROTEC 7SD686 : All versions < V 4.03; SIPROTEC 7SJ66 : All versions < V 4.20. The integrated web server (port 80/tcp) of the affected devices could allow remote attackers to obtain sensitive device information if network access was obtained.
31 CVE-2016-3963 DoS 2016-04-08 2018-05-25
5.0
None Remote Low Not required None None Partial
Siemens SCALANCE S613 allows remote attackers to cause a denial of service (web-server outage) via traffic to TCP port 443.
32 CVE-2016-3949 399 DoS 2016-06-27 2016-08-18
7.8
None Remote Low Not required None None Complete
Siemens SIMATIC S7-300 Profinet-enabled CPU devices with firmware before 3.2.12 and SIMATIC S7-300 Profinet-disabled CPU devices with firmware before 3.3.12 allow remote attackers to cause a denial of service (defect-mode transition) via crafted (1) ISO-TSAP or (2) Profibus packets.
33 CVE-2016-3155 200 +Info 2016-03-18 2016-12-02
3.6
None Local Low Not required Partial Partial None
Siemens APOGEE Insight uses weak permissions for the application folder, which allows local users to obtain sensitive information or modify data via unspecified vectors.
34 CVE-2016-2846 254 Bypass 2016-03-16 2016-12-02
6.4
None Remote Low Not required Partial Partial None
Siemens SIMATIC S7-1200 CPU devices before 4.0 allow remote attackers to bypass a "user program block" protection mechanism via unspecified vectors.
35 CVE-2016-2201 20 Bypass 2016-02-08 2016-12-06
5.0
None Remote Low Not required None Partial None
Siemens SIMATIC S7-1500 CPU devices before 1.8.3 allow remote attackers to bypass a replay protection mechanism via packets on TCP port 102.
36 CVE-2016-2200 20 DoS 2016-02-08 2016-12-06
7.8
None Remote Low Not required None None Complete
Siemens SIMATIC S7-1500 CPU devices before 1.8.3 allow remote attackers to cause a denial of service (STOP mode transition) via crafted packets on TCP port 102.
37 CVE-2016-1488 79 XSS 2016-01-30 2016-03-04
4.3
None Remote Medium Not required None Partial None
Cross-site scripting (XSS) vulnerability in the login form in the integrated web server on Siemens OZW OZW672 devices before 6.00 and OZW772 devices before 6.00 allows remote attackers to inject arbitrary web script or HTML via a crafted URL.
Total number of vulnerabilities : 37   Page : 1 (This Page)
CVE is a registred trademark of the MITRE Corporation and the authoritative source of CVE content is MITRE's CVE web site. CWE is a registred trademark of the MITRE Corporation and the authoritative source of CWE content is MITRE's CWE web site. OVAL is a registered trademark of The MITRE Corporation and the authoritative source of OVAL content is MITRE's OVAL web site.
Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.