CVEdetails.com the ultimate security vulnerability data source
(e.g.: CVE-2009-1234 or 2010-1234 or 20101234)
Log In   Register
Vulnerability Feeds & WidgetsNew   www.itsecdb.com  

Juniper : Security Vulnerabilities

Press ESC to close
# CVE ID CWE ID # of Exploits Vulnerability Type(s) Publish Date Update Date Score Gained Access Level Access Complexity Authentication Conf. Integ. Avail.
1 CVE-2006-2074 2006-04-27 2017-07-19
10.0
None Remote Low Not required Complete Complete Complete
Unspecified vulnerability in Juniper Networks JUNOSe E-series routers before 7-1-1 has unknown impact and remote attack vectors related to the DNS "client code," as demonstrated by the OUSPG PROTOS DNS test suite.
2 CVE-2007-5560 119 Exec Code Overflow 2007-10-18 2008-09-05
10.0
Admin Remote Low Not required Complete Complete Complete
Heap-based buffer overflow in the Juniper HTTP Service allows remote attackers to execute arbitrary code via a crafted HTTP packet. NOTE: as of 20071016, the only disclosure is a vague pre-advisory with no actionable information. However, since it is from a well-known researcher, it is being assigned a CVE identifier for tracking purposes.
3 CVE-2008-0960 287 Bypass 2008-06-10 2018-10-30
10.0
None Remote Low Not required Complete Complete Complete
SNMPv3 HMAC verification in (1) Net-SNMP 5.2.x before 5.2.4.1, 5.3.x before 5.3.2.1, and 5.4.x before 5.4.1.1; (2) UCD-SNMP; (3) eCos; (4) Juniper Session and Resource Control (SRC) C-series 1.0.0 through 2.0.0; (5) NetApp (aka Network Appliance) Data ONTAP 7.3RC1 and 7.3RC2; (6) SNMP Research before 16.2; (7) multiple Cisco IOS, CatOS, ACE, and Nexus products; (8) Ingate Firewall 3.1.0 and later and SIParator 3.1.0 and later; (9) HP OpenView SNMP Emanate Master Agent 15.x; and possibly other products relies on the client to specify the HMAC length, which makes it easier for remote attackers to bypass SNMP authentication via a length value of 1, which only checks the first byte.
4 CVE-2009-4643 119 Exec Code Overflow 2010-02-15 2010-02-16
10.0
None Remote Low Not required Complete Complete Complete
Stack-based buffer overflow in dsInstallerService.dll in the Juniper Installer Service, as used in Juniper Odyssey Access Client 4.72.11421.0 and other products, allows remote attackers to execute arbitrary code via a long string in a malformed DSSETUPSERVICE_CMD_UNINSTALL command to the NeoterisSetupService named pipe.
5 CVE-2013-4685 119 Exec Code Overflow 2013-07-11 2013-08-22
10.0
None Remote Low Not required Complete Complete Complete
Buffer overflow in flowd in Juniper Junos 10.4 before 10.4S14, 11.4 before 11.4R7, 12.1 before 12.1R6, and 12.1X44 before 12.1X44-D15 on SRX devices, when Captive Portal is enabled with the UAC enforcer role, allows remote attackers to execute arbitrary code via crafted HTTP requests, aka PR 849100.
6 CVE-2014-0429 2014-04-15 2018-01-04
10.0
None Remote Low Not required Complete Complete Complete
Unspecified vulnerability in Oracle Java SE 5.0u61, 6u71, 7u51, and 8; JRockit R27.8.1 and R28.3.1; and Java SE Embedded 7u51 allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to 2D.
7 CVE-2014-0456 2014-04-15 2018-01-04
10.0
None Remote Low Not required Complete Complete Complete
Unspecified vulnerability in Oracle Java SE 6u71, 7u51, and 8, and Java SE Embedded 7u51, allows remote attackers to affect confidentiality, integrity, and availability via unknown vectors related to Hotspot.
8 CVE-2014-3411 Exec Code 2014-05-19 2017-01-06
10.0
None Remote Low Not required Complete Complete Complete
Unspecified vulnerability in the NSM XDB service in Juniper NSM before 2012.2R8 allows remote attackers to execute arbitrary code via unspecified vectors.
9 CVE-2014-3412 Exec Code 2014-05-20 2014-05-21
10.0
None Remote Low Not required Complete Complete Complete
Unspecified vulnerability in Juniper Junos Space before 13.3R1.8, when the firewall in disabled, allows remote attackers to execute arbitrary commands via unspecified vectors.
10 CVE-2014-3413 798 +Info 2018-04-05 2018-08-10
10.0
Admin Remote Low Not required Complete Complete Complete
The MySQL server in Juniper Networks Junos Space before 13.3R1.8 has an unspecified account with a hardcoded password, which allows remote attackers to obtain sensitive information and consequently obtain administrative control by leveraging database access.
11 CVE-2015-7755 287 2015-12-19 2016-12-07
10.0
None Remote Low Not required Complete Complete Complete
Juniper ScreenOS 6.2.0r15 through 6.2.0r18, 6.3.0r12 before 6.3.0r12b, 6.3.0r13 before 6.3.0r13b, 6.3.0r14 before 6.3.0r14b, 6.3.0r15 before 6.3.0r15b, 6.3.0r16 before 6.3.0r16b, 6.3.0r17 before 6.3.0r17b, 6.3.0r18 before 6.3.0r18b, 6.3.0r19 before 6.3.0r19b, and 6.3.0r20 before 6.3.0r21 allows remote attackers to obtain administrative access by entering an unspecified password during a (1) SSH or (2) TELNET session.
12 CVE-2016-1279 287 +Priv +Info 2016-09-09 2017-08-31
10.0
None Remote Low Not required Complete Complete Complete
J-Web in Juniper Junos OS before 12.1X46-D45, 12.1X46-D50, 12.1X47 before 12.1X47-D35, 12.3 before 12.3R12, 12.3X48 before 12.3X48-D25, 13.3 before 13.3R10, 13.3R9 before 13.3R9-S1, 14.1 before 14.1R7, 14.1X53 before 14.1X53-D35, 14.2 before 14.2R6, 15.1 before 15.1A2 or 15.1F4, 15.1X49 before 15.1X49-D30, and 15.1R before 15.1R3 might allow remote attackers to obtain sensitive information and consequently gain administrative privileges via unspecified vectors.
13 CVE-2017-2320 200 DoS +Info 2017-04-24 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in Juniper Networks NorthStar Controller Application prior to version 2.1.0 Service Pack 1 may allow an unauthenticated, unprivileged, network-based attacker to cause various denials of services leading to targeted information disclosure, modification of any component of the NorthStar system, including managed systems, and full denial of services to any systems under management which NorthStar interacts with using read-only or read-write credentials.
14 CVE-2017-2343 798 2017-07-17 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
The Integrated User Firewall (UserFW) feature was introduced in Junos OS version 12.1X47-D10 on the Juniper SRX Series devices to provide simple integration of user profiles on top of the existing firewall polices. As part of an internal security review of the UserFW services authentication API, hardcoded credentials were identified and removed which can impact both the SRX Series device, and potentially LDAP and Active Directory integrated points. An attacker may be able to completely compromise SRX Series devices, as well as Active Directory servers and services. When Active Directory is compromised, it may allow access to user credentials, workstations, servers performing other functions such as email, database, etc. Inter-Forest Active Directory deployments may also be at risk as the attacker may gain full administrative control over one or more Active Directories depending on the credentials supplied by the administrator of the AD domains and SRX devices performing integrated authentication of users, groups and devices. To identify if your device is potentially vulnerable to exploitation, check to see if the service is operating; from CLI review the following output: [email protected]# run show services user-identification active-directory-access domain-controller status extensive A result of "Status: Connected" will indicate that the service is active on the device. To evaluate if user authentication is occurring through the device: [email protected]# run show services user-identification active-directory-access active-directory-authentication-table all Next review the results to see if valid users and groups are returned. e.g. Domain: juniperlab.com Total entries: 3 Source IP Username groups state 172.16.26.1 administrator Valid 192.168.26.2 engg01 engineers Valid 192.168.26.3 guest01 guests Valid Domain: NULL Total entries: 8 Source IP Username groups state 192.168.26.4 Invalid 192.168.26.5 Invalid This will also indicate that Valid users and groups are authenticating through the device. Affected releases are Juniper Networks Junos OS 12.3X48 from 12.3X48-D30 and prior to 12.3X48-D35 on SRX series; 15.1X49 from 15.1X49-D40 and prior to 15.1X49-D50 on SRX series. Devices on any version of Junos OS 12.1X46, or 12.1X47 are unaffected by this issue.
15 CVE-2017-10601 287 2017-07-17 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A specific device configuration can result in a commit failure condition. When this occurs, a user is logged in without being prompted for a password while trying to login through console, ssh, ftp, telnet or su, etc., This issue relies upon a device configuration precondition to occur. Typically, device configurations are the result of a trusted administrative change to the system's running configuration. The following error messages may be seen when this failure occurs: mgd: error: commit failed: (statements constraint check failed) Warning: Commit failed, activating partial configuration. Warning: Edit the router configuration to fix these errors. If the administrative changes are not made that result in such a failure, then this issue is not seen. No other Juniper Networks products or platforms are affected by this issue. Affected releases are Juniper Networks Junos OS 12.3 prior to 12.3R10, 12.3R11; 12.3X48 prior to 12.3X48-D20; 13.2 prior to 13.2R8; 13.3 prior to 13.3R7; 14.1 prior to 14.1R4-S12, 14.1R5, 14.1R6; 14.1X53 prior to 14.1X53-D30; 14.2 prior to 14.2R4; 15.1 prior to 15.1F2, 15.1F3, 15.1R2.
16 CVE-2017-10622 287 Bypass 2017-10-13 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
An authentication bypass vulnerability in Juniper Networks Junos Space Network Management Platform may allow a remote unauthenticated network based attacker to login as any privileged user. This issue only affects Junos Space Network Management Platform 17.1R1 without Patch v1 and 16.1 releases prior to 16.1R3. This issue was found by an external security researcher.
17 CVE-2018-0007 94 DoS Mem. Corr. 2018-01-10 2018-02-02
10.0
None Remote Low Not required Complete Complete Complete
An unauthenticated network-based attacker able to send a maliciously crafted LLDP packet to the local segment, through a local segment broadcast, may be able to cause a Junos device to enter an improper boundary check condition allowing a memory corruption to occur, leading to a denial of service. Further crafted packets may be able to sustain the denial of service condition. Score: 6.5 MEDIUM (CVSS:3.0/AV:A/AC:L/PR:N/UI:N/S:U/C:N/I:N/A:H) Further, if the attacker is authenticated on the target device receiving and processing the malicious LLDP packet, while receiving the crafted packets, the attacker may be able to perform command or arbitrary code injection over the target device thereby elevating their permissions and privileges, and taking control of the device. Score: 7.8 HIGH (CVSS:3.0/AV:L/AC:L/PR:L/UI:N/S:U/C:H/I:H/A:H) An unauthenticated network-based attacker able to send a maliciously crafted LLDP packet to one or more local segments, via LLDP proxy / tunneling agents or other LLDP through Layer 3 deployments, through one or more local segment broadcasts, may be able to cause multiple Junos devices to enter an improper boundary check condition allowing a memory corruption to occur, leading to multiple distributed Denials of Services. These Denials of Services attacks may have cascading Denials of Services to adjacent connected devices, impacts network devices, servers, workstations, etc. Further crafted packets may be able to sustain these Denials of Services conditions. Score 6.8 MEDIUM (CVSS:3.0/AV:N/AC:H/PR:N/UI:N/S:C/C:N/I:N/A:H) Further, if the attacker is authenticated on one or more target devices receiving and processing these malicious LLDP packets, while receiving the crafted packets, the attacker may be able to perform command or arbitrary code injection over multiple target devices thereby elevating their permissions and privileges, and taking control multiple devices. Score: 7.8 HIGH (CVSS:3.0/AV:L/AC:H/PR:L/UI:N/S:C/C:H/I:H/A:H) Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D71; 12.3 versions prior to 12.3R12-S7; 12.3X48 versions prior to 12.3X48-D55; 14.1 versions prior to 14.1R8-S5, 14.1R9; 14.1X53 versions prior to 14.1X53-D46, 14.1X53-D50, 14.1X53-D107; 14.2 versions prior to 14.2R7-S9, 14.2R8; 15.1 versions prior to 15.1F2-S17, 15.1F5-S8, 15.1F6-S8, 15.1R5-S7, 15.1R7; 15.1X49 versions prior to 15.1X49-D90; 15.1X53 versions prior to 15.1X53-D65; 16.1 versions prior to 16.1R4-S6, 16.1R5; 16.1X65 versions prior to 16.1X65-D45; 16.2 versions prior to 16.2R2; 17.1 versions prior to 17.1R2. No other Juniper Networks products or platforms are affected by this issue.
18 CVE-2018-0035 2018-07-11 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
QFX5200 and QFX10002 devices that have been shipped with Junos OS 15.1X53-D21, 15.1X53-D30, 15.1X53-D31, 15.1X53-D32, 15.1X53-D33 and 15.1X53-D60 or have been upgraded to these releases using the .bin or .iso images may contain an unintended additional Open Network Install Environment (ONIE) partition. This additional partition allows the superuser to reboot to the ONIE partition which will wipe out the content of the Junos partition and its configuration. Once rebooted, the ONIE partition will not have root password configured, thus any user can access the console or SSH, using an IP address acquired from DHCP, as root without password. Once the device has been shipped or upgraded with the ONIE partition installed, the issue will persist. Simply upgrading to higher release via the CLI will not resolve the issue. No other Juniper Networks products or platforms are affected by this issue.
19 CVE-2008-2476 20 DoS 2008-10-03 2017-09-28
9.3
None Remote Medium Not required Complete Complete Complete
The IPv6 Neighbor Discovery Protocol (NDP) implementation in (1) FreeBSD 6.3 through 7.1, (2) OpenBSD 4.2 and 4.3, (3) NetBSD, (4) Force10 FTOS before E7.7.1.1, (5) Juniper JUNOS, and (6) Wind River VxWorks 5.x through 6.4 does not validate the origin of Neighbor Discovery messages, which allows remote attackers to cause a denial of service (loss of connectivity) or read private network traffic via a spoofed message that modifies the Forward Information Base (FIB).
20 CVE-2015-5362 399 DoS Exec Code 2015-07-14 2015-07-15
9.3
None Remote Medium Not required Complete Complete Complete
The BFD daemon in Juniper Junos OS 12.1X44 before 12.1X44-D50, 12.1X46 before 12.1X46-D35, 12.1X47 before 12.1X47-D25, 12.3 before 12.3R10, 12.3X48 before 12.3X48-D15, 13.2 before 13.2R8, 13.3 before 13.3R6, 14.1 before 14.1R5, 14.1X50 before 14.1X50-D85, 14.1X55 before 14.1X55-D20, 14.2 before 14.2R3, 15.1 before 15.1R1, and 15.1X49 before 15.1X49-D10 allows remote attackers to cause a denial of service (bfdd crash and restart) or execute arbitrary code via a crafted BFD packet.
21 CVE-2015-7754 20 DoS Exec Code 2016-01-08 2016-01-13
9.3
None Remote Medium Not required Complete Complete Complete
Juniper ScreenOS before 6.3.0r21, when ssh-pka is configured and enabled, allows remote attackers to cause a denial of service (system crash) or execute arbitrary code via crafted SSH negotiation.
22 CVE-2017-2332 287 +Priv 2017-04-24 2017-04-28
9.3
None Remote Medium Not required Complete Complete Complete
An insufficient authentication vulnerability in Juniper Networks NorthStar Controller Application prior to version 2.1.0 Service Pack 1 may allow a malicious, network based, unauthenticated attacker to perform privileged actions to gain complete control over the environment.
23 CVE-2018-0052 287 2018-10-10 2019-10-09
9.3
None Remote Medium Not required Complete Complete Complete
If RSH service is enabled on Junos OS and if the PAM authentication is disabled, a remote unauthenticated attacker can obtain root access to the device. RSH service is disabled by default on Junos. There is no documented CLI command to enable this service. However, an undocumented CLI command allows a privileged Junos user to enable RSH service and disable PAM, and hence expose the system to unauthenticated root access. When RSH is enabled, the device is listing to RSH connections on port 514. This issue is not exploitable on platforms where Junos release is based on FreeBSD 10+. Affected releases are Juniper Networks Junos OS: 12.1X46 versions prior to 12.1X46-D77 on SRX Series; 12.3 versions prior to 12.3R12-S10; 12.3X48 versions prior to 12.3X48-D75 on SRX Series; 14.1X53 versions prior to 14.1X53-D47 on QFX/EX Series; 15.1 versions prior to 15.1R4-S9, 15.1R6-S6, 15.1R7; 15.1X49 versions prior to 15.1X49-D131, 15.1X49-D140 on SRX Series; 15.1X53 versions prior to 15.1X53-D59 on EX2300/EX3400 Series; 15.1X53 versions prior to 15.1X53-D67 on QFX10K Series; 15.1X53 versions prior to 15.1X53-D233 on QFX5200/QFX5110 Series; 15.1X53 versions prior to 15.1X53-D471, 15.1X53-D490 on NFX Series; 16.1 versions prior to 16.1R3-S9, 16.1R4-S9, 16.1R5-S4, 16.1R6-S4, 16.1R7; 16.2 versions prior to 16.2R2-S5; 17.1 versions prior to 17.1R1-S7, 17.1R2-S7, 17.1R3; 17.2 versions prior to 17.2R1-S6, 17.2R2-S4, 17.2R3; 17.2X75 versions prior to 17.2X75-D110, 17.2X75-D91; 17.3 versions prior to 17.3R1-S4, 17.3R2-S2, 17.3R3; 17.4 versions prior to 17.4R1-S3, 17.4R2; 18.2X75 versions prior to 18.2X75-D5.
24 CVE-2013-6618 20 1 Exec Code 2013-11-05 2017-08-28
9.0
None Remote Low Single system Complete Complete Complete
jsdm/ajax/port.php in J-Web in Juniper Junos before 10.4R13, 11.4 before 11.4R7, 12.1 before 12.1R5, 12.2 before 12.2R3, and 12.3 before 12.3R1 allows remote authenticated users to execute arbitrary commands via the rsargs parameter in an exec action.
25 CVE-2014-3816 264 +Priv 2014-07-11 2014-07-18
9.0
None Remote Low Single system Complete Complete Complete
Juniper Junos 11.4 before 11.4R12, 12.1 before 12.1R11, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D30, 12.1X46 before 12.1X46-D20, 12.1X47 before 12.1X47-D10, 12.2 before 12.2R8-S2, 12.3 before 12.3R7, 13.1 before 13.1R4-S2, 13.2 before 13.2R5, 13.3 before 13.3R2-S2, and 14.1 before 14.1R1 allows remote authenticated users to gain privileges via unspecified combinations of CLI commands and arguments.
26 CVE-2016-4929 77 Exec Code 2017-03-20 2017-03-22
9.0
None Remote Low Single system Complete Complete Complete
Command injection vulnerability in Junos Space before 15.2R2 allows attackers to execute arbitrary code as a root user.
27 CVE-2017-2349 77 Exec Code 2017-07-17 2019-10-09
9.0
None Remote Low Single system Complete Complete Complete
A command injection vulnerability in the IDP feature of Juniper Networks Junos OS on SRX series devices potentially allows a user with login access to the device to execute shell commands and elevate privileges. Affected releases are Juniper Networks Junos OS 12.1X44 prior to 12.1X44-D60; 12.1X46 prior to 12.1X46-D50; 12.1X47 prior to 12.1X47-D30, 12.1X47-D35; 12.3X48 prior to 12.3X48-D20, 12.3X48-D30; 15.1X49 prior to 15.1X49-D20, 15.1X49-D30.
28 CVE-2013-6012 287 Bypass 2013-10-28 2013-10-29
8.5
None Remote Medium Single system Complete Complete Complete
Juniper Junos 12.1X44 before 12.1.X44-D20 and 12.1X45 before 12.1X45-D15, when the no-validate option is enabled, does not properly handle configuration validation errors during the config commit phase of the boot-up sequence, which allows remote attackers to bypass authentication via unspecified vectors.
29 CVE-2018-0015 862 Exec Code 2018-02-22 2019-10-02
8.5
None Remote Medium Single system Complete Complete Complete
A malicious user with unrestricted access to the AppFormix application management platform may be able to access a Python debug console and execute system commands with root privilege. The AppFormix Agent exposes the debug console on a host where AppFormix Agent is executing. If the host is executing AppFormix Agent, an attacker may access the debug console and execute Python commands with root privilege. Affected AppFormix releases are: All versions up to and including 2.7.3; 2.11 versions prior to 2.11.3; 2.15 versions prior to 2.15.2. Juniper SIRT is not aware of any malicious exploitation of this vulnerability, however, the issue has been seen in a production network. No other Juniper Networks products or platforms are affected by this issue.
30 CVE-2018-0016 Exec Code 2018-04-11 2019-10-09
8.5
None Remote Medium Single system Complete Complete Complete
Receipt of a specially crafted Connectionless Network Protocol (CLNP) datagram destined to an interface of a Junos OS device may result in a kernel crash or lead to remote code execution. Devices are only vulnerable to the specially crafted CLNP datagram if 'clns-routing' or ES-IS is explicitly configured. Devices with without CLNS enabled are not vulnerable to this issue. Devices with IS-IS configured on the interface are not vulnerable to this issue unless CLNS routing is also enabled. This issue only affects devices running Junos OS 15.1. Affected releases are Juniper Networks Junos OS: 15.1 versions prior to 15.1F5-S3, 15.1F6-S8, 15.1F7, 15.1R5; 15.1X49 versions prior to 15.1X49-D60; 15.1X53 versions prior to 15.1X53-D66, 15.1X53-D233, 15.1X53-D471. Earlier releases are unaffected by this vulnerability, and the issue has been resolved in Junos OS 16.1R1 and all subsequent releases.
31 CVE-2005-4587 DoS 2005-12-30 2008-09-05
7.8
None Remote Low Not required None None Complete
Juniper NetScreen-Security Manager (NSM) 2004 FP2 and FP3 allow remote attackers to cause a denial of service (crash or hang of server components that are automatically restarted) via a long crafted string on (1) port 7800 (the GUI Server port) or (2) port 7801 (the Device Server port).
32 CVE-2007-6372 20 DoS 2007-12-14 2011-04-29
7.8
None Remote Low Not required None None Complete
Unspecified vulnerability in Juniper JUNOS 7.3 through 8.4 allows remote attackers to cause a denial of service (crash) via malformed BGP packets, possibly BGP UPDATE packets that trigger session flapping.
33 CVE-2013-4684 DoS 2013-07-11 2013-08-22
7.8
None Remote Low Not required None None Complete
flowd in Juniper Junos 10.4 before 10.4S14, 11.4 before 11.4R8, 12.1 before 12.1R7, and 12.1X44 before 12.1X44-D15 on SRX devices, when PIM and NAT are enabled, allows remote attackers to cause a denial of service (daemon crash) via crafted PIM packets, aka PR 842253.
34 CVE-2013-4687 DoS 2013-07-11 2013-08-22
7.8
None Remote Low Not required None None Complete
flowd in Juniper Junos 10.4 before 10.4S14, 11.2 and 11.4 before 11.4R6-S2, and 12.1 before 12.1R6 on SRX devices, when certain Application Layer Gateways (ALGs) are enabled, allows remote attackers to cause a denial of service (daemon crash) via crafted TCP packets, aka PRs 727980, 806269, and 835593.
35 CVE-2013-4688 DoS 2013-07-11 2013-08-22
7.8
None Remote Low Not required None None Complete
flowd in Juniper Junos 10.4 before 10.4R11 on SRX devices, when the MSRPC Application Layer Gateway (ALG) is enabled, allows remote attackers to cause a denial of service (daemon crash) via crafted MSRPC requests, aka PR 772834.
36 CVE-2014-0618 DoS 2014-01-10 2017-08-28
7.8
None Remote Low Not required None None Complete
Juniper Junos before 10.4 before 10.4R16, 11.4 before 11.4R8, 12.1R before 12.1R7, 12.1X44 before 12.1X44-D20, and 12.1X45 before 12.1X45-D10 on SRX Series service gateways, when used as a UAC enforcer and captive portal is enabled, allows remote attackers to cause a denial of service (flowd crash) via a crafted HTTP message.
37 CVE-2014-2842 399 DoS 2014-04-15 2014-07-18
7.8
None Remote Low Not required None None Complete
Juniper ScreenOS 6.3 and earlier allows remote attackers to cause a denial of service (crash and restart or failover) via a malformed SSL/TLS packet.
38 CVE-2014-3813 DoS 2014-06-13 2014-06-26
7.8
None Remote Low Not required None None Complete
Unspecified vulnerability in the Juniper Networks NetScreen Firewall products with ScreenOS before 6.3r17, when configured to use the internal DNS lookup client, allows remote attackers to cause a denial of service (crash and reboot) via vectors related to a DNS lookup.
39 CVE-2014-3814 20 DoS 2014-06-13 2014-06-26
7.8
None Remote Low Not required None None Complete
The Juniper Networks NetScreen Firewall devices with ScreenOS before 6.3r17, when configured to use the internal DNS lookup client, allows remote attackers to cause a denial of service (crash and reboot) via a sequence of malformed packets to the device IP.
40 CVE-2014-3815 20 DoS 2014-07-11 2014-07-24
7.8
None Remote Low Not required None None Complete
Juniper Junos 12.1X46 before 12.1X46-D20 and 12.1X47 before 12.1X47-D10 on SRX Series devices allows remote attackers to cause a denial of service (flowd crash) via a crafted SIP packet.
41 CVE-2014-3817 20 DoS 2014-07-11 2014-08-01
7.8
None Remote Low Not required None None Complete
Juniper Junos 11.4 before 11.4R12, 12.1X44 before 12.1X44-D32, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, and 12.1X47 before 12.1X47-D10 on SRX Series devices, when NAT protocol translation from IPv4 to IPv6 is enabled, allows remote attackers to cause a denial of service (flowd hang or crash) via a crafted packet.
42 CVE-2014-3818 119 DoS Overflow Mem. Corr. 2014-10-14 2015-11-05
7.8
None Remote Low Not required None None Complete
Juniper Junos OS 9.1 through 11.4 before 11.4R11, 12.1 before R10, 12.1X44 before D40, 12.1X46 before D30, 12.1X47 before D11 and 12.147-D15, 12.1X48 before D41 and D62, 12.2 before R8, 12.2X50 before D70, 12.3 before R6, 13.1 before R4-S2, 13.1X49 before D49, 13.1X50 before 30, 13.2 before R4, 13.2X50 before D20, 13.2X51 before D25, 13.2X52 before D15, 13.3 before R2, and 14.1 before R1, when supporting 4-byte AS numbers and a BGP peer does not, allows remote attackers to cause a denial of service (memory corruption and RDP routing process crash and restart) via crafted transitive attributes in a BGP UPDATE.
43 CVE-2014-3819 20 DoS 2014-07-11 2014-07-18
7.8
None Remote Low Not required None None Complete
Juniper Junos 11.4 before 11.4R12, 12.1 before 12.1R10, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, 12.1X47 before 12.1X47-D10, 12.2 before 12.2R8, 12.3 before 12.3R7, 13.1 before 13.1R4, 13.2 before 13.2R4, 13.3 before 13.3R2, and 14.1 before 14.1R1, when Auto-RP is enabled, allows remote attackers to cause a denial of service (RDP routing process crash and restart) via a malformed PIM packet.
44 CVE-2014-6377 399 DoS 2014-10-14 2017-09-07
7.8
None Remote Low Not required None None Complete
Juniper JunosE before 13.3.3p0-1, 14.x before 14.3.2, and 15.x before 15.1.0, when DEBUG severity icmpTraffic logging is enabled, allows remote attackers to cause a denial of service (SRP reset) via a crafted ICMP packet to the (1) interface or (2) loopback IP address, which triggers a processor exception in ip_RxData_8.
45 CVE-2014-6378 399 DoS 2014-10-14 2017-09-07
7.8
None Remote Low Not required None None Complete
Juniper Junos 11.4 before R12-S4, 12.1X44 before D35, 12.1X45 before D30, 12.1X46 before D25, 12.1X47 before D10, 12.2 before R9, 12.2X50 before D70, 12.3 before R7, 13.1 before R4 before S3, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R5, 13.2X50 before D20, 13.2X51 before D26 and D30, 13.2X52 before D15, 13.3 before R3, and 14.1 before R1 allows remote attackers to cause a denial of service (router protocol daemon crash) via a crafted RSVP PATH message.
46 CVE-2014-6380 DoS 2014-10-14 2017-09-07
7.8
None Remote Low Not required None None Complete
Juniper Junos 11.4 before R11, 12.1 before R9, 12.1X44 before D30, 12.1X45 before D20, 12.1X46 before D15, 12.1X47 before D10, 12.2 before R8, 12.2X50 before D70, 12.3 before R6, 13.1 before R4, 13.1X49 before D55, 13.1X50 before D30, 13.2 before R4, 13.2X50 before D20, 13.2X51 before D15, 13.2X52 before D15, 13.3 before R1, when using an em interface to connect to a certain internal network, allows remote attackers to cause a denial of service (em driver bock and FPC reset or "go offline") via a series of crafted (1) CLNP fragmented packets, when clns-routing or ESIS is configured, or (2) IPv4 or (3) IPv6 fragmented packets.
47 CVE-2014-6386 17 DoS 2015-01-16 2015-01-26
7.8
None Remote Low Not required None None Complete
Juniper Junos 11.4 before 11.4R8, 12.1X44 before 12.1X44-D35, 12.1X45 before 12.1X45-D25, 12.1X46 before 12.1X46-D20, 12.1X47 before 12.1X47-D10, 12.2 before 12.2R9, 12.3R2 before 12.3R2-S3, 12.3 before 12.3R3, 13.1 before 13.1R4, and 13.2 before 13.2R1 allows remote attackers to cause a denial of service (assertion failure and rpd restart) via a crafted BGP FlowSpec prefix.
48 CVE-2014-6450 119 DoS Overflow 2015-10-16 2016-12-07
7.8
None Remote Low Not required None None Complete
Juniper Junos OS before 11.4R12-S4, 12.1X44 before 12.1X44-D41, 12.1X46 before 12.1X46-D26, 12.1X47 before 12.1X47-D11/D15, 12.2 before 12.2R9, 12.2X50 before 12.2X50-D70, 12.3 before 12.3R8, 12.3X48 before 12.3X48-D10, 12.3X50 before 12.3X50-D42, 13.1 before 13.1R4-S3, 13.1X49 before 13.1X49-D42, 13.1X50 before 13.1X50-D30, 13.2 before 13.2R6, 13.2X51 before 13.2X51-D26, 13.2X52 before 13.2X52-D15, 13.3 before 13.3R3-S3, 14.1 before 14.1R3, 14.2 before 14.2R1, 15.1 before 15.1R1, and 15.1X49 before 15.1X49-D10, when configured for IPv6, allow remote attackers to cause a denial of service (mbuf chain corruption and kernel panic) via crafted IPv6 packets.
49 CVE-2014-6451 DoS 2015-10-16 2016-12-07
7.8
None Remote Low Not required None None Complete
J-Web in Juniper vSRX virtual firewalls with Junos OS before 15.1X49-D20 allows remote attackers to cause a denial of service (system reboot) via unspecified vectors.
50 CVE-2015-7749 20 DoS 2015-10-19 2016-12-08
7.8
None Remote Low Not required None None Complete
The PFE daemon in Juniper vSRX virtual firewalls with Junos OS before 15.1X49-D20 allows remote attackers to cause a denial of service via an unspecified connection request to the "host-OS."
Total number of vulnerabilities : 334   Page : 1 (This Page)2 3 4 5 6 7
CVE is a registred trademark of the MITRE Corporation and the authoritative source of CVE content is MITRE's CVE web site. CWE is a registred trademark of the MITRE Corporation and the authoritative source of CWE content is MITRE's CWE web site. OVAL is a registered trademark of The MITRE Corporation and the authoritative source of OVAL content is MITRE's OVAL web site.
Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.