ISC : Security Vulnerabilities, CVEs, Published In 2019 CVSS score >= 7

With pipelining enabled each incoming query on a TCP connection requires a similar resource allocation to a query received via UDP or via TCP without pipelining enabled. A client using a TCP-pipelined connection to a server could consume more resources than the server has been provisioned to handle. When a TCP connection with a large number of pipelined queries is closed, the load on the server releasing these multiple resources can cause it to become unresponsive, even for queries that can be answered authoritatively or from cache. (This is most likely to be perceived as an intermittent server problem).

A defect in code added to support QNAME minimization can cause named to exit with an assertion failure if a forwarder returns a referral rather than resolving the query. This affects BIND versions 9.14.0 up to 9.14.6, and 9.15.0 up to 9.15.4.

Mirror zones are a BIND feature allowing recursive servers to pre-cache zone data provided by other servers. A mirror zone is similar to a zone of type secondary, except that its data is subject to DNSSEC validation before being used in answers, as if it had been looked up via traditional recursion, and when mirror zone data cannot be validated, BIND falls back to using traditional recursion instead of the mirror zone. However, an error in the validity checks for the incoming zone data can allow an on-path attacker to replace zone data that was validated with a configured trust anchor with forged data of the attacker's choosing. The mirror zone feature is most often used to serve a local copy of the root zone. If an attacker was able to insert themselves into the network path between a recursive server using a mirror zone and a root name server, this vulnerability could then be used to cause the recursive server to accept a copy of falsified root zone data. This affects BIND versions 9.14.0 up to 9.14.6, and 9.15.0 up to 9.15.4.

There had existed in one of the ISC BIND libraries a bug in a function that was used by dhcpd when operating in DHCPv6 mode. There was also a bug in dhcpd relating to the use of this function per its documentation, but the bug in the library function prevented this from causing any harm. All releases of dhcpd from ISC contain copies of this, and other, BIND libraries in combinations that have been tested prior to release and are known to not present issues like this. Some third-party packagers of ISC software have modified the dhcpd source, BIND source, or version matchup in ways that create the crash potential. Based on reports available to ISC, the crash probability is large and no analysis has been done on how, or even if, the probability can be manipulated by an attacker. Affects: Builds of dhcpd versions prior to version 4.4.1 when using BIND versions 9.11.2 or later, or BIND versions with specific bug fixes backported to them. ISC does not have access to comprehensive version lists for all repackagings of dhcpd that are vulnerable. In particular, builds from other vendors may also be affected. Operators are advised to consult their vendor documentation.

An error in the EDNS Client Subnet (ECS) feature for recursive resolvers can cause BIND to exit with an assertion failure when processing a response that has malformed RRSIGs. Versions affected: BIND 9.10.5-S1 -> 9.11.6-S1 of BIND 9 Supported Preview Edition.

In BIND Supported Preview Edition, an error in the nxdomain-redirect feature can occur in versions which support EDNS Client Subnet (ECS) features. In those versions which have ECS support, enabling nxdomain-redirect is likely to lead to BIND exiting due to assertion failure. Versions affected: BIND Supported Preview Edition version 9.10.5-S1 -> 9.11.5-S5. ONLY BIND Supported Preview Edition releases are affected.

A programming error in the nxdomain-redirect feature can cause an assertion failure in query.c if the alternate namespace used by nxdomain-redirect is a descendant of a zone that is served locally. The most likely scenario where this might occur is if the server, in addition to performing NXDOMAIN redirection for recursive clients, is also serving a local copy of the root zone or using mirroring to provide the root zone, although other configurations are also possible. Versions affected: BIND 9.12.0-> 9.12.4, 9.14.0. Also affects all releases in the 9.13 development branch.

A failure to free memory can occur when processing messages having a specific combination of EDNS options. Versions affected are: BIND 9.10.7 -> 9.10.8-P1, 9.11.3 -> 9.11.5-P1, 9.12.0 -> 9.12.3-P1, and versions 9.10.7-S1 -> 9.11.5-S3 of BIND 9 Supported Preview Edition. Versions 9.13.0 -> 9.13.6 of the 9.13 development branch are also affected.

By design, BIND is intended to limit the number of TCP clients that can be connected at any given time. The number of allowed connections is a tunable parameter which, if unset, defaults to a conservative value for most servers. Unfortunately, the code which was intended to limit the number of simultaneous connections contained an error which could be exploited to grow the number of simultaneous connections beyond this limit. Versions affected: BIND 9.9.0 -> 9.10.8-P1, 9.11.0 -> 9.11.6, 9.12.0 -> 9.12.4, 9.14.0. BIND 9 Supported Preview Edition versions 9.9.3-S1 -> 9.11.5-S3, and 9.11.5-S5. Versions 9.13.0 -> 9.13.7 of the 9.13 development branch are also affected. Versions prior to BIND 9.9.0 have not been evaluated for vulnerability to CVE-2018-5743.

While backporting a feature for a newer branch of BIND9, RedHat introduced a path leading to an assertion failure in buffer.c:420. Affects RedHat versions bind-9.9.4-65.el7 -> bind-9.9.4-72.el7. No ISC releases are affected. Other packages from other distributions who made the same error may also be affected.

"deny-answer-aliases" is a little-used feature intended to help recursive server operators protect end users against DNS rebinding attacks, a potential method of circumventing the security model used by client browsers. However, a defect in this feature makes it easy, when the feature is in use, to experience an assertion failure in name.c. Affects BIND 9.7.0->9.8.8, 9.9.0->9.9.13, 9.10.0->9.10.8, 9.11.0->9.11.4, 9.12.0->9.12.2, 9.13.0->9.13.2.

An extension to hooks capabilities which debuted in Kea 1.4.0 introduced a memory leak for operators who are using certain hooks library facilities. In order to support multiple requests simultaneously, Kea 1.4 added a callout handle store but unfortunately the initial implementation of this store does not properly free memory in every case. Hooks which make use of query4 or query6 parameters in their callouts can leak memory, resulting in the eventual exhaustion of available memory and subsequent failure of the server process. Affects Kea DHCP 1.4.0.

Change #4777 (introduced in October 2017) introduced an unforeseen issue in releases which were issued after that date, affecting which clients are permitted to make recursive queries to a BIND nameserver. The intended (and documented) behavior is that if an operator has not specified a value for the "allow-recursion" setting, it SHOULD default to one of the following: none, if "recursion no;" is set in named.conf; a value inherited from the "allow-query-cache" or "allow-query" settings IF "recursion yes;" (the default for that setting) AND match lists are explicitly set for "allow-query-cache" or "allow-query" (see the BIND9 Administrative Reference Manual section 6.2 for more details); or the intended default of "allow-recursion {localhost; localnets;};" if "recursion yes;" is in effect and no values are explicitly set for "allow-query-cache" or "allow-query". However, because of the regression introduced by change #4777, it is possible when "recursion yes;" is in effect and no match list values are provided for "allow-query-cache" or "allow-query" for the setting of "allow-recursion" to inherit a setting of all hosts from the "allow-query" setting default, improperly permitting recursion to all clients. Affects BIND 9.9.12, 9.10.7, 9.11.3, 9.12.0->9.12.1-P2, the development release 9.13.0, and also releases 9.9.12-S1, 9.10.7-S1, 9.11.3-S1, and 9.11.3-S2 from BIND 9 Supported Preview Edition.

A problem with the implementation of the new serve-stale feature in BIND 9.12 can lead to an assertion failure in rbtdb.c, even when stale-answer-enable is off. Additionally, problematic interaction between the serve-stale feature and NSEC aggressive negative caching can in some cases cause undesirable behavior from named, such as a recursion loop or excessive logging. Deliberate exploitation of this condition could cause operational problems depending on the particular manifestation -- either degradation or denial of service. Affects BIND 9.12.0 and 9.12.1.

While handling a particular type of malformed packet BIND erroneously selects a SERVFAIL rcode instead of a FORMERR rcode. If the receiving view has the SERVFAIL cache feature enabled, this can trigger an assertion failure in badcache.c when the request doesn't contain all of the expected information. Affects BIND 9.10.5-S1 to 9.10.5-S4, 9.10.6-S1, 9.10.6-S2.

A malicious client which is allowed to send very large amounts of traffic (billions of packets) to a DHCP server can eventually overflow a 32-bit reference counter, potentially causing dhcpd to crash. Affects ISC DHCP 4.1.0 -> 4.1-ESV-R15, 4.2.0 -> 4.2.8, 4.3.0 -> 4.3.6, 4.4.0.

Failure to properly bounds-check a buffer used for processing DHCP options allows a malicious server (or an entity masquerading as a server) to cause a buffer overflow (and resulting crash) in dhclient by sending a response containing a specially constructed options section. Affects ISC DHCP versions 4.1.0 -> 4.1-ESV-R15, 4.2.0 -> 4.2.8, 4.3.0 -> 4.3.6, 4.4.0

BIND was improperly sequencing cleanup operations on upstream recursion fetch contexts, leading in some cases to a use-after-free error that can trigger an assertion failure and crash in named. Affects BIND 9.0.0 to 9.8.x, 9.9.0 to 9.9.11, 9.10.0 to 9.10.6, 9.11.0 to 9.11.2, 9.9.3-S1 to 9.9.11-S1, 9.10.5-S1 to 9.10.6-S1, 9.12.0a1 to 9.12.0rc1.

A vulnerability stemming from failure to properly clean up closed OMAPI connections can lead to exhaustion of the pool of socket descriptors available to the DHCP server. Affects ISC DHCP 4.1.0 to 4.1-ESV-R15, 4.2.0 to 4.2.8, 4.3.0 to 4.3.6. Older versions may also be affected but are well beyond their end-of-life (EOL). Releases prior to 4.1.0 have not been tested.

An attacker who is able to send and receive messages to an authoritative DNS server and who has knowledge of a valid TSIG key name for the zone and service being targeted may be able to manipulate BIND into accepting an unauthorized dynamic update. Affects BIND 9.4.0->9.8.8, 9.9.0->9.9.10-P1, 9.10.0->9.10.5-P1, 9.11.0->9.11.1-P1, 9.9.3-S1->9.9.10-S2, 9.10.5-S1->9.10.5-S2.

The BIND installer on Windows uses an unquoted service path which can enable a local user to achieve privilege escalation if the host file system permissions allow this. Affects BIND 9.2.6-P2->9.2.9, 9.3.2-P1->9.3.6, 9.4.0->9.8.8, 9.9.0->9.9.10, 9.10.0->9.10.5, 9.11.0->9.11.1, 9.9.3-S1->9.9.10-S1, 9.10.5-S1.

Mistaken assumptions about the ordering of records in the answer section of a response containing CNAME or DNAME resource records could lead to a situation in which named would exit with an assertion failure when processing a response in which records occurred in an unusual order. Affects BIND 9.9.9-P6, 9.9.10b1->9.9.10rc1, 9.10.4-P6, 9.10.5b1->9.10.5rc1, 9.11.0-P3, 9.11.1b1->9.11.1rc1, and 9.9.9-S8.

Under some conditions when using both DNS64 and RPZ to rewrite query responses, query processing can resume in an inconsistent state leading to either an INSIST assertion failure or an attempt to read through a NULL pointer. Affects BIND 9.8.8, 9.9.3-S1 -> 9.9.9-S7, 9.9.3 -> 9.9.9-P5, 9.9.10b1, 9.10.0 -> 9.10.4-P5, 9.10.5b1, 9.11.0 -> 9.11.0-P2, 9.11.1b1.

An error in handling certain queries can cause an assertion failure when a server is using the nxdomain-redirect feature to cover a zone for which it is also providing authoritative service. A vulnerable server could be intentionally stopped by an attacker if it was using a configuration that met the criteria for the vulnerability and if the attacker could cause it to accept a query that possessed the required attributes. Please note: This vulnerability affects the "nxdomain-redirect" feature, which is one of two methods of handling NXDOMAIN redirection, and is only available in certain versions of BIND. Redirection using zones of type "redirect" is not affected by this vulnerability. Affects BIND 9.9.8-S1 -> 9.9.8-S3, 9.9.9-S1 -> 9.9.9-S6, 9.11.0-9.11.0-P1.