Cisco » IOS » 12.3ys : Security Vulnerabilities, CVEs, CVSS score >= 7

A vulnerability in the web UI of Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to conduct a cross-site request forgery (CSRF) attack on an affected system. The vulnerability is due to insufficient CSRF protections for the web UI on an affected device. An attacker could exploit this vulnerability by persuading a user of the interface to follow a malicious link. A successful exploit could allow the attacker to perform arbitrary actions with the privilege level of the targeted user. If the user has administrative privileges, the attacker could alter the configuration, execute commands, or reload an affected device.

A vulnerability in the FTP application layer gateway (ALG) functionality used by Network Address Translation (NAT), NAT IPv6 to IPv4 (NAT64), and the Zone-Based Policy Firewall (ZBFW) in Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to a buffer overflow that occurs when an affected device inspects certain FTP traffic. An attacker could exploit this vulnerability by performing a specific FTP transfer through the device. A successful exploit could allow the attacker to cause the device to reload.

A vulnerability in the logic that handles access control to one of the hardware components in Cisco's proprietary Secure Boot implementation could allow an authenticated, local attacker to write a modified firmware image to the component. This vulnerability affects multiple Cisco products that support hardware-based Secure Boot functionality. The vulnerability is due to an improper check on the area of code that manages on-premise updates to a Field Programmable Gate Array (FPGA) part of the Secure Boot hardware implementation. An attacker with elevated privileges and access to the underlying operating system that is running on the affected device could exploit this vulnerability by writing a modified firmware image to the FPGA. A successful exploit could either cause the device to become unusable (and require a hardware replacement) or allow tampering with the Secure Boot verification process, which under some circumstances may allow the attacker to install and boot a malicious software image. An attacker will need to fulfill all the following conditions to attempt to exploit this vulnerability: Have privileged administrative access to the device. Be able to access the underlying operating system running on the device; this can be achieved either by using a supported, documented mechanism or by exploiting another vulnerability that would provide an attacker with such access. Develop or have access to a platform-specific exploit. An attacker attempting to exploit this vulnerability across multiple affected platforms would need to research each one of those platforms and then develop a platform-specific exploit. Although the research process could be reused across different platforms, an exploit developed for a given hardware platform is unlikely to work on a different hardware platform.

The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60376, CSCve78027.

A vulnerability in the Cisco Cluster Management Protocol (CMP) processing code in Cisco IOS and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a reload of an affected device or remotely execute code with elevated privileges. The Cluster Management Protocol utilizes Telnet internally as a signaling and command protocol between cluster members. The vulnerability is due to the combination of two factors: (1) the failure to restrict the use of CMP-specific Telnet options only to internal, local communications between cluster members and instead accept and process such options over any Telnet connection to an affected device; and (2) the incorrect processing of malformed CMP-specific Telnet options. An attacker could exploit this vulnerability by sending malformed CMP-specific Telnet options while establishing a Telnet session with an affected Cisco device configured to accept Telnet connections. An exploit could allow an attacker to execute arbitrary code and obtain full control of the device or cause a reload of the affected device. This affects Catalyst switches, Embedded Service 2020 switches, Enhanced Layer 2 EtherSwitch Service Module, Enhanced Layer 2/3 EtherSwitch Service Module, Gigabit Ethernet Switch Module (CGESM) for HP, IE Industrial Ethernet switches, ME 4924-10GE switch, RF Gateway 10, and SM-X Layer 2/3 EtherSwitch Service Module. Cisco Bug IDs: CSCvd48893.

A vulnerability in the Layer 2 Tunneling Protocol (L2TP) parsing function of Cisco IOS (12.0 through 12.4 and 15.0 through 15.6) and Cisco IOS XE (3.1 through 3.18) could allow an unauthenticated, remote attacker to cause an affected device to reload. The vulnerability is due to insufficient validation of L2TP packets. An attacker could exploit this vulnerability by sending a crafted L2TP packet to an affected device. A successful exploit could allow the attacker to cause the affected device to reload, resulting in a denial of service (DoS) condition. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS or Cisco IOS XE Software if the L2TP feature is enabled for the device and the device is configured as an L2TP Version 2 (L2TPv2) or L2TP Version 3 (L2TPv3) endpoint. By default, the L2TP feature is not enabled. Cisco Bug IDs: CSCuy82078.

The server IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.6, IOS XE through 3.18S, IOS XR 4.3.x and 5.0.x through 5.2.x, and PIX before 7.0 allows remote attackers to obtain sensitive information from device memory via a Security Association (SA) negotiation request, aka Bug IDs CSCvb29204 and CSCvb36055 or BENIGNCERTAIN.

The AAA service in Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.1 through 3.18 and 16.2 allows remote attackers to cause a denial of service (device reload) via a failed SSH connection attempt that is mishandled during generation of an error-log message, aka Bug ID CSCuy87667.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.6 and IOS XE 3.1 through 3.17 and 16.2 allow remote attackers to cause a denial of service (device reload) via crafted fields in an H.323 message, aka Bug ID CSCux04257.

Race condition in the Common Classification Engine (CCE) in the Measurement, Aggregation, and Correlation Engine (MACE) implementation in Cisco IOS 15.4(2)T3 and earlier allows remote attackers to cause a denial of service (device reload) via crafted network traffic that triggers improper handling of the timing of process switching and Cisco Express Forwarding (CEF) switching, aka Bug ID CSCuj96752.

Race condition in the Measurement, Aggregation, and Correlation Engine (MACE) implementation in Cisco IOS 15.4(2)T3 and earlier allows remote attackers to cause a denial of service (device reload) via crafted network traffic that triggers improper handling of the timing of process switching and Cisco Express Forwarding (CEF) switching, aka Bug ID CSCul48736.

The Zone-Based Firewall implementation in Cisco IOS 15.4(2)T3 and earlier allows remote attackers to cause a denial of service (device reload) via crafted network traffic that triggers incorrect kernel-timer handling, aka Bug ID CSCuh25672.

The Network-Based Application Recognition (NBAR) protocol implementation in Cisco IOS 15.3(100)M and earlier on Cisco 2900 Integrated Services Router (aka Cisco Internet Router) devices allows remote attackers to cause a denial of service (NBAR process hang) via IPv4 packets, aka Bug ID CSCuo73682.

Cisco IOS 15.1(2)SY3 and earlier, when used with Supervisor Engine 2T (aka Sup2T) on Catalyst 6500 devices, allows remote attackers to cause a denial of service (device crash) via crafted multicast packets, aka Bug ID CSCuf60783.

Race condition in the VRF-aware NAT feature in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 allows remote attackers to cause a denial of service (memory consumption) via IPv4 packets, aka Bug IDs CSCtg47129 and CSCtz96745.

The DHCPv6 server in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x, 3.1.xS before 3.1.4S, 3.1.xSG and 3.2.xSG before 3.2.5SG, 3.2.xS, 3.2.xXO, 3.3.xS, and 3.3.xSG before 3.3.1SG allows remote attackers to cause a denial of service (device reload) via a malformed DHCPv6 packet, aka Bug ID CSCto57723.

The Intrusion Prevention System (IPS) feature in Cisco IOS 12.3 through 12.4 and 15.0 through 15.2, in certain configurations of enabled categories and missing signatures, allows remote attackers to cause a denial of service (device reload) via DNS packets, aka Bug ID CSCtw55976.

The SIP implementation in Cisco Unified Communications Manager (CUCM) 6.x and 7.x before 7.1(5b)su5, 8.x before 8.5(1)su4, and 8.6 before 8.6(2a)su1; Cisco IOS 12.2 through 12.4 and 15.0 through 15.2; and Cisco IOS XE 3.3.xSG before 3.3.1SG, 3.4.xS, and 3.5.xS allows remote attackers to cause a denial of service (service crash or device reload) via a crafted SIP message containing an SDP session description, aka Bug IDs CSCtw66721, CSCtj33003, and CSCtw84664.

Cisco IOS 12.3 and 12.4 on Aironet access points allows remote attackers to cause a denial of service (radio-interface input-queue hang) via IAPP 0x3281 packets, aka Bug ID CSCtc12426.

Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS before 3.1.2S, 3.2.xS through 3.4.xS before 3.4.2S, 3.5.xS before 3.5.1S, and 3.1.xSG and 3.2.xSG before 3.2.2SG, when AAA authorization is enabled, allow remote authenticated users to bypass intended access restrictions and execute commands via a (1) HTTP or (2) HTTPS session, aka Bug ID CSCtr91106.

The Multicast Source Discovery Protocol (MSDP) implementation in Cisco IOS 12.0, 12.2 through 12.4, and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.1S and 3.1.xSG and 3.2.xSG before 3.2.2SG allows remote attackers to cause a denial of service (device reload) via encapsulated IGMP data in an MSDP packet, aka Bug ID CSCtr28857.

The IKEv1 implementation in Cisco IOS 12.2 through 12.4 and 15.0 through 15.2 and IOS XE 2.1.x through 2.6.x and 3.1.xS through 3.4.xS before 3.4.2S, 3.5.xS before 3.5.1S, and 3.2.xSG before 3.2.2SG allows remote attackers to cause a denial of service (device reload) by sending IKE UDP packets over (1) IPv4 or (2) IPv6, aka Bug ID CSCts38429.

A memory leak vulnerability exists in Cisco IOS before 15.2(1)T due to a memory leak in the HTTP PROXY Server process (aka CSCtu52820), when configured with Cisco ISR Web Security with Cisco ScanSafe and User Authenticaiton NTLM configured.

Memory leak in the NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (memory consumption or device reload) by sending crafted SIP packets to UDP port 5060, aka Bug ID CSCtj04672.

The provider-edge MPLS NAT implementation in Cisco IOS 12.1 through 12.4 and 15.0 through 15.1, and IOS XE 3.1.xSG, allows remote attackers to cause a denial of service (device reload) via a malformed SIP packet to UDP port 5060, aka Bug ID CSCti98219.