CVEdetails.com the ultimate security vulnerability data source
(e.g.: CVE-2009-1234 or 2010-1234 or 20101234)
Log In   Register
Vulnerability Feeds & WidgetsNew   www.itsecdb.com  

Security Vulnerabilities (CVSS score between 9 and 10)

Press ESC to close
# CVE ID CWE ID # of Exploits Vulnerability Type(s) Publish Date Update Date Score Gained Access Level Access Complexity Authentication Conf. Integ. Avail.
1701 CVE-2017-6742 119 Exec Code Overflow 2017-07-17 2017-07-21
9.0
None Remote Low Single system Complete Complete Complete
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve54313.
1702 CVE-2017-6741 119 Exec Code Overflow 2017-07-17 2017-07-21
9.0
None Remote Low Single system Complete Complete Complete
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66658.
1703 CVE-2017-6740 119 Exec Code Overflow 2017-07-17 2017-07-21
9.0
None Remote Low Single system Complete Complete Complete
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66601.
1704 CVE-2017-6739 119 Exec Code Overflow 2017-07-17 2017-07-21
9.0
None Remote Low Single system Complete Complete Complete
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve66540.
1705 CVE-2017-6738 119 Exec Code Overflow 2017-07-17 2017-07-21
9.0
None Remote Low Single system Complete Complete Complete
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve89865, CSCsy56638.
1706 CVE-2017-6737 119 Exec Code Overflow 2017-07-17 2017-07-21
9.0
None Remote Low Single system Complete Complete Complete
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve60402.
1707 CVE-2017-6736 119 Exec Code Overflow 2017-07-17 2018-01-07
9.0
None Remote Low Single system Complete Complete Complete
The Simple Network Management Protocol (SNMP) subsystem of Cisco IOS 12.0 through 12.4 and 15.0 through 15.6 and IOS XE 2.2 through 3.17 contains multiple vulnerabilities that could allow an authenticated, remote attacker to remotely execute code on an affected system or cause an affected system to reload. An attacker could exploit these vulnerabilities by sending a crafted SNMP packet to an affected system via IPv4 or IPv6. Only traffic directed to an affected system can be used to exploit these vulnerabilities. The vulnerabilities are due to a buffer overflow condition in the SNMP subsystem of the affected software. The vulnerabilities affect all versions of SNMP: Versions 1, 2c, and 3. To exploit these vulnerabilities via SNMP Version 2c or earlier, the attacker must know the SNMP read-only community string for the affected system. To exploit these vulnerabilities via SNMP Version 3, the attacker must have user credentials for the affected system. All devices that have enabled SNMP and have not explicitly excluded the affected MIBs or OIDs should be considered vulnerable. Cisco Bug IDs: CSCve57697.
1708 CVE-2017-6714 78 Exec Code 2017-07-05 2017-07-07
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the AutoIT service of Cisco Ultra Services Framework Staging Server could allow an unauthenticated, remote attacker to execute arbitrary shell commands as the Linux root user. The vulnerability is due to improper shell invocations. An attacker could exploit this vulnerability by crafting CLI command inputs to execute Linux shell commands as the root user. This vulnerability affects all releases of Cisco Ultra Services Framework Staging Server prior to Releases 5.0.3 and 5.1. Cisco Bug IDs: CSCvc76673.
1709 CVE-2017-6713 264 2017-07-05 2017-07-07
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the Play Framework of Cisco Elastic Services Controller (ESC) could allow an unauthenticated, remote attacker to gain full access to the affected system. The vulnerability is due to static, default credentials for the Cisco ESC UI that are shared between installations. An attacker who can extract the static credentials from an existing installation of Cisco ESC could generate an admin session token that allows access to all instances of the ESC web UI. This vulnerability affects Cisco Elastic Services Controller prior to releases 2.3.1.434 and 2.3.2. Cisco Bug IDs: CSCvc76627.
1710 CVE-2017-6712 78 2017-07-05 2017-07-07
9.0
None Remote Low Single system Complete Complete Complete
A vulnerability in certain commands of Cisco Elastic Services Controller could allow an authenticated, remote attacker to elevate privileges to root and run dangerous commands on the server. The vulnerability occurs because a "tomcat" user on the system can run certain shell commands, allowing the user to overwrite any file on the filesystem and elevate privileges to root. This vulnerability affects Cisco Elastic Services Controller prior to releases 2.3.1.434 and 2.3.2. Cisco Bug IDs: CSCvc76634.
1711 CVE-2017-6692 255 2017-06-13 2017-06-20
9.0
Admin Remote Low Single system Complete Complete Complete
A vulnerability in Cisco Ultra Services Framework Element Manager could allow an authenticated, remote attacker to log in to the device with the privileges of the root user, aka an Insecure Default Account Information Vulnerability. More Information: CSCvd85710. Known Affected Releases: 21.0.v0.65839.
1712 CVE-2017-6688 255 2017-06-13 2017-06-20
9.0
None Remote Low Single system Complete Complete Complete
A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux root user, aka an Insecure Default Password Vulnerability. More Information: CSCvc76631. Known Affected Releases: 2.2(9.76).
1713 CVE-2017-6684 255 2017-06-13 2017-06-21
9.0
None Remote Low Single system Complete Complete Complete
A vulnerability in Cisco Elastic Services Controllers could allow an authenticated, remote attacker to log in to an affected system as the Linux admin user, aka an Insecure Default Credentials Vulnerability. More Information: CSCvc76651. Known Affected Releases: 21.0.0.
1714 CVE-2017-6683 78 Exec Code 2017-06-13 2017-06-23
9.0
None Remote Low Single system Complete Complete Complete
A vulnerability in the esc_listener.py script of Cisco Elastic Services Controllers could allow an authenticated, remote attacker to execute arbitrary commands as the tomcat user on an affected system, aka an Authentication Request Processing Arbitrary Command Execution Vulnerability. More Information: CSCvc76642. Known Affected Releases: 2.2(9.76).
1715 CVE-2017-6667 20 Exec Code 2017-06-13 2017-06-26
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the update process for the dynamic JAR file of the Cisco Context Service software development kit (SDK) could allow an unauthenticated, remote attacker to execute arbitrary code on the affected device with the privileges of the web server. More Information: CSCvb66730. Known Affected Releases: 2.0.
1716 CVE-2017-6640 264 +Priv 2017-06-08 2017-07-07
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in Cisco Prime Data Center Network Manager (DCNM) Software could allow an unauthenticated, remote attacker to log in to the administrative console of a DCNM server by using an account that has a default, static password. The account could be granted root- or system-level privileges. The vulnerability exists because the affected software has a default user account that has a default, static password. The user account is created automatically when the software is installed. An attacker could exploit this vulnerability by connecting remotely to an affected system and logging in to the affected software by using the credentials for this default user account. A successful exploit could allow the attacker to use this default user account to log in to the affected software and gain access to the administrative console of a DCNM server. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software releases prior to Release 10.2(1) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd95346.
1717 CVE-2017-6639 284 Exec Code 2017-06-08 2017-08-12
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the role-based access control (RBAC) functionality of Cisco Prime Data Center Network Manager (DCNM) could allow an unauthenticated, remote attacker to access sensitive information or execute arbitrary code with root privileges on an affected system. The vulnerability is due to the lack of authentication and authorization mechanisms for a debugging tool that was inadvertently enabled in the affected software. An attacker could exploit this vulnerability by remotely connecting to the debugging tool via TCP. A successful exploit could allow the attacker to access sensitive information about the affected software or execute arbitrary code with root privileges on the affected system. This vulnerability affects Cisco Prime Data Center Network Manager (DCNM) Software Releases 10.1(1) and 10.1(2) for Microsoft Windows, Linux, and Virtual Appliance platforms. Cisco Bug IDs: CSCvd09961.
1718 CVE-2017-6622 264 Bypass 2017-05-18 2017-09-29
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the web interface for Cisco Prime Collaboration Provisioning could allow an unauthenticated, remote attacker to bypass authentication and perform command injection with root privileges. The vulnerability is due to missing security constraints in certain HTTP request methods, which could allow access to files via the web interface. An attacker could exploit this vulnerability by sending a crafted HTTP request to the targeted application. This vulnerability affects Cisco Prime Collaboration Provisioning Software Releases prior to 12.1. Cisco Bug IDs: CSCvc98724.
1719 CVE-2017-6619 20 Exec Code 2017-04-20 2017-04-26
9.0
None Remote Low Single system Complete Complete Complete
A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary commands on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize user-supplied HTTP input. An attacker could exploit this vulnerability by sending an HTTP POST request that contains crafted, deserialized user data to the affected software. A successful exploit could allow the attacker to execute arbitrary commands with root-level privileges on the affected system, which the attacker could use to conduct further attacks. Cisco Bug IDs: CSCvd14591.
1720 CVE-2017-6616 20 Exec Code 2017-04-20 2017-04-26
9.0
None Remote Low Single system Complete Complete Complete
A vulnerability in the web-based GUI of Cisco Integrated Management Controller (IMC) 3.0(1c) could allow an authenticated, remote attacker to execute arbitrary code on an affected system. The vulnerability exists because the affected software does not sufficiently sanitize specific values that are received as part of a user-supplied HTTP request. An attacker could exploit this vulnerability by sending a crafted HTTP request to the affected software. A successful exploit could allow the attacker to execute arbitrary code with the privileges of the user on the affected system. Cisco Bug IDs: CSCvd14578.
1721 CVE-2017-6554 264 Exec Code 2017-04-14 2017-05-23
9.0
None Remote Low Single system Complete Complete Complete
pmmasterd in Quest Privilege Manager before 6.0.0.061, when configured as a policy server, allows remote attackers to write to arbitrary files and consequently execute arbitrary code with root privileges via an ACT_NEWFILESENT action.
1722 CVE-2017-6553 119 Overflow Mem. Corr. 2017-04-29 2017-08-12
10.0
None Remote Low Not required Complete Complete Complete
Buffer Overflow in Quest One Identity Privilege Manager for Unix before 6.0.0.061 allows remote attackers to obtain full access to the policy server via an ACT_ALERT_EVENT request that causes memory corruption in the pmmasterd daemon.
1723 CVE-2017-6549 254 2017-03-09 2017-08-15
9.3
None Remote Medium Not required Complete Complete Complete
Session hijack vulnerability in httpd on ASUS RT-N56U, RT-N66U, RT-AC66U, RT-N66R, RT-AC66R, RT-AC68U, RT-AC68R, RT-N66W, RT-AC66W, RT-AC87R, RT-AC87U, RT-AC51U, RT-AC68P, RT-N11P, RT-N12+, RT-N12E B1, RT-AC3200, RT-AC53U, RT-AC1750, RT-AC1900P, RT-N300, and RT-AC750 routers with firmware before 3.0.0.4.380.7378; RT-AC68W routers with firmware before 3.0.0.4.380.7266; and RT-N600, RT-N12+ B1, RT-N11P B1, RT-N12VP B1, RT-N12E C1, RT-N300 B1, and RT-N12+ Pro routers with firmware before 3.0.0.4.380.9488; and Asuswrt-Merlin firmware before 380.65_2 allows remote attackers to steal any active admin session by sending cgi_logout and asusrouter-Windows-IFTTT-1.0 in certain HTTP headers.
1724 CVE-2017-6548 119 Exec Code Overflow 2017-03-09 2017-08-15
10.0
None Remote Low Not required Complete Complete Complete
Buffer overflows in networkmap on ASUS RT-N56U, RT-N66U, RT-AC66U, RT-N66R, RT-AC66R, RT-AC68U, RT-AC68R, RT-N66W, RT-AC66W, RT-AC87R, RT-AC87U, RT-AC51U, RT-AC68P, RT-N11P, RT-N12+, RT-N12E B1, RT-AC3200, RT-AC53U, RT-AC1750, RT-AC1900P, RT-N300, and RT-AC750 routers with firmware before 3.0.0.4.380.7378; RT-AC68W routers with firmware before 3.0.0.4.380.7266; and RT-N600, RT-N12+ B1, RT-N11P B1, RT-N12VP B1, RT-N12E C1, RT-N300 B1, and RT-N12+ Pro routers with firmware before 3.0.0.4.380.9488; and Asuswrt-Merlin firmware before 380.65_2 allow remote attackers to execute arbitrary code on the router via a long host or port in crafted multicast messages.
1725 CVE-2017-6526 77 Exec Code 2017-03-09 2017-08-15
10.0
None Remote Low Not required Complete Complete Complete
An issue was discovered in dnaTools dnaLIMS 4-2015s13. dnaLIMS is vulnerable to unauthenticated command execution through an improperly protected administrative web shell (cgi-bin/dna/sysAdmin.cgi POST requests).
1726 CVE-2017-6517 264 Exec Code 2017-03-23 2017-07-10
10.0
None Remote Low Not required Complete Complete Complete
Microsoft Skype 7.16.0.102 contains a vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code on the targeted system. This vulnerability exists due to the way .dll files are loaded by Skype. It allows an attacker to load a .dll of the attacker's choosing that could execute arbitrary code without the user's knowledge.The specific flaw exists within the handling of DLL (api-ms-win-core-winrt-string-l1-1-0.dll) loading by the Skype.exe process.
1727 CVE-2017-6492 89 Sql 2017-03-05 2017-03-24
9.0
None Remote Low Single system Complete Complete Complete
SQL Injection was discovered in adm_program/modules/dates/dates_function.php in Admidio 3.2.5. The POST parameter dat_cat_id is concatenated into a SQL query without any input validation/sanitization.
1728 CVE-2017-6466 20 2017-03-11 2017-03-14
9.3
None Remote Medium Not required Complete Complete Complete
F-Secure Software Updater 2.20, as distributed in several F-Secure products, downloads installation packages over plain http and does not perform file integrity validation after download. Man-in-the-middle attackers can replace the file with their own executable which will be executed under the SYSTEM account. Note that when Software Updater is configured to install updates automatically, it checks if the downloaded file is digitally signed by default, but does not check the author of the signature. When running in manual mode (default), no signature check is performed.
1729 CVE-2017-6432 310 2017-03-09 2017-03-15
9.3
None Remote Medium Not required Complete Complete Complete
An issue was discovered on Dahua DHI-HCVR7216A-S3 3.210.0001.10 build 2016-06-06 devices. The Dahua DVR Protocol, which operates on TCP Port 37777, is an unencrypted, binary protocol. Performing a Man-in-the-Middle attack allows both sniffing and injections of packets, which allows creation of fully privileged new users, in addition to capture of sensitive information.
1730 CVE-2017-6398 77 Exec Code 2017-03-14 2017-03-15
9.0
Admin Remote Low Single system Complete Complete Complete
An issue was discovered in Trend Micro InterScan Messaging Security (Virtual Appliance) 9.1-1600. An authenticated user can execute a terminal command in the context of the web server user (which is root). Besides, the default installation of IMSVA comes with default administrator credentials. The saveCert.imss endpoint takes several user inputs and performs blacklisting. After that, it uses them as arguments to a predefined operating-system command without proper sanitization. However, because of an improper blacklisting rule, it's possible to inject arbitrary commands into it.
1731 CVE-2017-6361 77 Exec Code 2017-03-23 2017-08-15
10.0
None Remote Low Not required Complete Complete Complete
QNAP QTS before 4.2.4 Build 20170313 allows attackers to execute arbitrary commands via unspecified vectors.
1732 CVE-2017-6360 77 +Priv +Info 2017-03-23 2017-08-15
10.0
None Remote Low Not required Complete Complete Complete
QNAP QTS before 4.2.4 Build 20170313 allows attackers to gain administrator privileges and obtain sensitive information via unspecified vectors.
1733 CVE-2017-6359 77 Exec Code +Priv 2017-03-23 2017-08-15
10.0
None Remote Low Not required Complete Complete Complete
QNAP QTS before 4.2.4 Build 20170313 allows attackers to gain administrator privileges and execute arbitrary commands via unspecified vectors.
1734 CVE-2017-6351 798 2017-03-05 2017-08-31
9.3
None Remote Medium Not required Complete Complete Complete
The WePresent WiPG-1500 device with firmware 1.0.3.7 has a manufacturer account that has a hardcoded username / password. Once the device is set to DEBUG mode, an attacker can connect to the device using the telnet protocol and log into the device with the 'abarco' hardcoded manufacturer account. This account is not documented, nor is the DEBUG feature or the use of telnetd on port tcp/5885.
1735 CVE-2017-6343 284 2017-02-27 2017-03-15
9.3
None Remote Medium Not required Complete Complete Complete
The web interface on Dahua DHI-HCVR7216A-S3 devices with NVR Firmware 3.210.0001.10 2016-06-06, Camera Firmware 2.400.0000.28.R 2016-03-29, and SmartPSS Software 1.16.1 2017-01-19 allows remote attackers to obtain login access by leveraging knowledge of the MD5 Admin Hash without knowledge of the corresponding password, a different vulnerability than CVE-2013-6117.
1736 CVE-2017-6342 284 2017-02-27 2017-03-15
10.0
None Remote Low Not required Complete Complete Complete
An issue was discovered on Dahua DHI-HCVR7216A-S3 devices with NVR Firmware 3.210.0001.10 2016-06-06, Camera Firmware 2.400.0000.28.R 2016-03-29, and SmartPSS Software 1.16.1 2017-01-19. When SmartPSS Software is launched, while on the login screen, the software in the background automatically logs in as admin. This allows sniffing sensitive information identified in CVE-2017-6341 without prior knowledge of the password. This is a different vulnerability than CVE-2013-6117.
1737 CVE-2017-6334 264 Exec Code 2017-03-05 2017-08-31
9.0
None Remote Low Single system Complete Complete Complete
dnslookup.cgi on NETGEAR DGN2200 devices with firmware through 10.0.0.50 allows remote authenticated users to execute arbitrary OS commands via shell metacharacters in the host_name field of an HTTP POST request, a different vulnerability than CVE-2017-6077.
1738 CVE-2017-6326 264 Exec Code 2017-06-26 2017-08-11
10.0
None Remote Low Not required Complete Complete Complete
The Symantec Messaging Gateway can encounter an issue of remote code execution, which describes a situation whereby an individual may obtain the ability to execute commands remotely on a target machine or in a target process.
1739 CVE-2017-6320 78 Exec Code +Priv 2017-07-18 2017-08-15
9.0
None Remote Low Single system Complete Complete Complete
A remote command injection vulnerability exists in the Barracuda Load Balancer product line (confirmed on v5.4.0.004 (2015-11-26) and v6.0.1.006 (2016-08-19); fixed in 6.1.0.003 (2017-01-17)) in which an authenticated user can execute arbitrary shell commands and gain root privileges. The vulnerability stems from unsanitized data being processed in a system call when the delete_assessment command is issued.
1740 CVE-2017-6316 20 Exec Code 2017-07-20 2017-09-15
10.0
None Remote Low Not required Complete Complete Complete
Citrix NetScaler SD-WAN devices through v9.1.2.26.561201 allow remote attackers to execute arbitrary shell commands as root via a CGISESSID cookie. On CloudBridge (the former name of NetScaler SD-WAN) devices, the cookie name was CAKEPHP rather than CGISESSID.
1741 CVE-2017-6315 20 Exec Code 2017-09-19 2017-09-27
10.0
None Remote Low Not required Complete Complete Complete
Astaro Security Gateway (aka ASG) 7 allows remote attackers to execute arbitrary code via a crafted request to index.plx.
1742 CVE-2017-6264 264 Exec Code 2017-11-14 2017-12-03
9.3
None Remote Medium Not required Complete Complete Complete
An elevation of privilege vulnerability exists in the NVIDIA GPU driver (gm20b_clk_throt_set_cdev_state), where an out of bound memory read is used as a function pointer could lead to code execution in the kernel.This issue is rated as high because it could allow a local malicious application to execute arbitrary code within the context of a privileged process. Product: Android. Version: N/A. Android ID: A-34705430. References: N-CVE-2017-6264.
1743 CVE-2017-6247 264 Exec Code 2017-07-06 2017-07-17
9.3
None Remote Medium Not required Complete Complete Complete
An elevation of privilege vulnerability in the NVIDIA sound driver could enable a local malicious application to execute arbitrary code within the context of the kernel. This issue is rated as High due to the possibility of local arbitrary code execution in a privileged process in the kernel. Product: Android. Versions: N/A. Android ID: A-34386301. References: N-CVE-2017-6247.
1744 CVE-2017-6230 78 Exec Code 2018-02-14 2018-03-16
9.0
Admin Remote Low Single system Complete Complete Complete
Ruckus Networks Solo APs firmware releases R110.x or before and Ruckus Networks SZ managed APs firmware releases R5.x or before contain authenticated Root Command Injection in the web-GUI that could allow authenticated valid users to execute privileged commands on the respective systems.
1745 CVE-2017-6229 78 Exec Code 2018-02-14 2018-03-12
9.0
None Remote Low Single system Complete Complete Complete
Ruckus Networks Unleashed AP firmware releases before 200.6.10.1.x and Ruckus Networks Zone Director firmware releases 10.1.0.0.x, 9.10.2.0.x, 9.12.3.0.x, 9.13.3.0.x, 10.0.1.0.x or before contain authenticated Root Command Injection in the CLI that could allow authenticated valid users to execute privileged commands on the respective systems.
1746 CVE-2017-6224 77 Exec Code 2017-10-13 2017-11-03
9.3
None Remote Medium Not required Complete Complete Complete
Ruckus Wireless Zone Director Controller firmware releases ZD9.x, ZD10.0.0.x, ZD10.0.1.x (less than 10.0.1.0.17 MR1 release) and Ruckus Wireless Unleashed AP Firmware releases 200.0.x, 200.1.x, 200.2.x, 200.3.x, 200.4.x. contain OS Command Injection vulnerabilities that could allow local authenticated users to execute arbitrary privileged commands on the underlying operating system by appending those commands in the Common Name field in the Certificate Generation Request.
1747 CVE-2017-6223 78 Exec Code 2017-10-13 2017-10-27
9.3
None Remote Medium Not required Complete Complete Complete
Ruckus Wireless Zone Director Controller firmware releases ZD9.9.x, ZD9.10.x, ZD9.13.0.x less than 9.13.0.0.232 contain OS Command Injection vulnerabilities in the ping functionality that could allow local authenticated users to execute arbitrary privileged commands on the underlying operating system.
1748 CVE-2017-6211 119 Overflow 2017-12-05 2017-12-22
10.0
None Remote Low Not required Complete Complete Complete
In Android for MSM, Firefox OS for MSM, QRD Android, with all Android releases from CAF using the Linux kernel, in the processing of a downlink supplementary services message, a buffer overflow can occur.
1749 CVE-2017-6088 89 Exec Code Sql 2017-04-11 2017-08-15
9.0
None Remote Low Single system Complete Complete Complete
Multiple SQL injection vulnerabilities in EyesOfNetwork (aka EON) 5.0 and earlier allow remote authenticated users to execute arbitrary SQL commands via the (1) bp_name, (2) display, (3) search, or (4) equipment parameter to module/monitoring_ged/ged_functions.php or the (5) type parameter to monitoring_ged/ajax.php.
1750 CVE-2017-6079 77 Exec Code 2017-05-16 2017-05-25
10.0
None Remote Low Not required Complete Complete Complete
The HTTP web-management application on Edgewater Networks Edgemarc appliances has a hidden page that allows for user-defined commands such as specific iptables routes, etc., to be set. You can use this page as a web shell essentially to execute commands, though you get no feedback client-side from the web application: if the command is valid, it executes. An example is the wget command. The page that allows this has been confirmed in firmware as old as 2006.
CVE is a registred trademark of the MITRE Corporation and the authoritative source of CVE content is MITRE's CVE web site. CWE is a registred trademark of the MITRE Corporation and the authoritative source of CWE content is MITRE's CWE web site. OVAL is a registered trademark of The MITRE Corporation and the authoritative source of OVAL content is MITRE's OVAL web site.
Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.