CVEdetails.com the ultimate security vulnerability data source
(e.g.: CVE-2009-1234 or 2010-1234 or 20101234)
Log In   Register
Vulnerability Feeds & WidgetsNew   www.itsecdb.com  

Security Vulnerabilities (CVSS score between 8 and 10)

Press ESC to close
# CVE ID CWE ID # of Exploits Vulnerability Type(s) Publish Date Update Date Score Gained Access Level Access Complexity Authentication Conf. Integ. Avail.
1251 CVE-2018-11711 287 Bypass 2018-06-04 2018-08-01
10.0
None Remote Low Not required Complete Complete Complete
** DISPUTED ** A remote attacker can bypass the System Manager Mode on the Canon MF210 and MF220 web interface without knowing the PIN for /login.html via vectors involving /portal_top.html to get full access to the device. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation.
1252 CVE-2018-11692 287 Bypass 2018-06-04 2018-07-20
10.0
None Remote Low Not required Complete Complete Complete
** DISPUTED ** An issue was discovered on Canon LBP6650, LBP3370, LBP3460, and LBP7750C devices. It is possible to bypass the Administrator Mode authentication for /tlogin.cgi via vectors involving frame.cgi?page=DevStatus. NOTE: the vendor reportedly responded that this issue occurs when a customer keeps the default settings without using the countermeasures and best practices shown in the documentation.
1253 CVE-2018-11691 798 2019-05-14 2019-10-10
10.0
None Remote Low Not required Complete Complete Complete
Emerson DeltaV Smart Switch Command Center application, available in versions 11.3.x and 12.3.1, was unable to change the DeltaV Smart Switches? management password upon commissioning. Emerson released patches for DeltaV workstations to address this issue, and the patches can be downloaded from Emerson?s Guardian Support Portal. Please refer to the DeltaV Security Notification DSN19003 (KBA NK-1900-0808) for more information about this issue. DeltaV versions 13.3 and higher use the Network Device Command Center application to manage DeltaV Smart Switches, and this newer application is not impacted by this issue. After patching the Smart Switch Command Center, users are required to either commission the DeltaV Smart Switches or change password using the tool.
1254 CVE-2018-11682 798 Exec Code 2018-06-02 2019-06-27
10.0
None Remote Low Not required Complete Complete Complete
** DISPUTED ** Default and unremovable support credentials allow attackers to gain total super user control of an IoT device through a TELNET session to products using the Stanza Lutron integration protocol Revision M to Revision Y. NOTE: The vendor disputes this id as not being a vulnerability because what can be done through the ports revolve around controlling lighting, not code execution. A certain set of commands are listed, which bear some similarity to code, but they are not arbitrary and do not allow admin-level control of a machine.
1255 CVE-2018-11681 798 Exec Code 2018-06-02 2019-06-27
10.0
None Remote Low Not required Complete Complete Complete
** DISPUTED ** Default and unremovable support credentials (user:nwk password:nwk2) allow attackers to gain total super user control of an IoT device through a TELNET session to products using the RadioRA 2 Lutron integration protocol Revision M to Revision Y. NOTE: The vendor disputes this id as not being a vulnerability because what can be done through the ports revolve around controlling lighting, not code execution. A certain set of commands are listed, which bear some similarity to code, but they are not arbitrary and do not allow admin-level control of a machine.
1256 CVE-2018-11652 78 2018-06-01 2018-07-03
10.0
None Remote Low Not required Complete Complete Complete
CSV Injection vulnerability in Nikto 2.1.6 and earlier allows remote attackers to inject arbitrary OS commands via the Server field in an HTTP response header, which is directly injected into a CSV report.
1257 CVE-2018-11638 434 Exec Code 2018-07-03 2018-09-05
9.0
None Remote Low Single system Complete Complete Complete
Unrestricted Upload of a File with a Dangerous Type in the administrative console in Dialogic PowerMedia XMS through 3.5 allows remote authenticated users to upload malicious code to the web root to gain code execution.
1258 CVE-2018-11629 798 Exec Code 2018-06-02 2019-06-27
10.0
None Remote Low Not required Complete Complete Complete
** DISPUTED ** Default and unremovable support credentials (user:lutron password:integration) allow attackers to gain total super user control of an IoT device through a TELNET session to products using the HomeWorks QS Lutron integration protocol Revision M to Revision Y. NOTE: The vendor disputes this id as not being a vulnerability because what can be done through the ports revolve around controlling lighting, not code execution. A certain set of commands are listed, which bear some similarity to code, but they are not arbitrary and do not allow admin-level control of a machine.
1259 CVE-2018-11551 426 Exec Code 2018-06-01 2018-07-03
9.3
None Remote Medium Not required Complete Complete Complete
AXON PBX 2.02 contains a DLL hijacking vulnerability that could allow an unauthenticated, remote attacker to execute arbitrary code on a targeted system. The vulnerability exists because a DLL file is loaded by 'pbxsetup.exe' improperly.
1260 CVE-2018-11541 862 2018-07-09 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
A root privilege escalation vulnerability in the Sonus SBC 1000 / SBC 2000 / SBC SWe Lite web interface allows unauthorised access to privileged content via an unspecified vector. It affects the 1000 and 2000 devices 6.0.x up to Build 446, 6.1.x up to Build 492, and 7.0.x up to Build 485. It affects the SWe Lite devices 6.1.x up to Build 111 and 7.0.x up to Build 140.
1261 CVE-2018-11491 287 Exec Code 2018-07-25 2018-09-20
10.0
None Remote Low Not required Complete Complete Complete
ASUS HG100 devices with firmware before 1.05.12 allow unauthenticated access, leading to remote command execution.
1262 CVE-2018-11458 Exec Code 2018-12-12 2019-10-09
9.3
None Remote Medium Not required Complete Complete Complete
A vulnerability has been identified in SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). The integrated VNC server on port 5900/tcp of the affected products could allow a remote attacker to execute code with privileged permissions on the system by sending specially crafted network requests to port 5900/tcp. Please note that this vulnerability is only exploitable if port 5900/tcp is manually opened in the firewall configuration of network port X130. The security vulnerability could be exploited by an attacker with network access to the affected devices and port. Successful exploitation requires no privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the VNC server. At the time of advisory publication no public exploitation of this security vulnerability was known.
1263 CVE-2018-11457 Exec Code 2018-12-12 2019-10-09
9.3
None Remote Medium Not required Complete Complete Complete
A vulnerability has been identified in SINUMERIK 828D V4.7 (All versions < V4.7 SP6 HF1), SINUMERIK 840D sl V4.7 (All versions < V4.7 SP6 HF5), SINUMERIK 840D sl V4.8 (All versions < V4.8 SP3). The integrated web server on port 4842/tcp of the affected products could allow a remote attacker to execute code with privileged permissions on the system by sending specially crafted network requests to port 4842/tcp. Please note that this vulnerability is only exploitable if port 4842/tcp is manually opened in the firewall configuration of network port X130. The security vulnerability could be exploited by an attacker with network access to the affected devices on port 4842/tcp. Successful exploitation requires no privileges and no user interaction. The vulnerability could allow an attacker to compromise confidentiality, integrity and availability of the web server. At the time of advisory publication no public exploitation of this security vulnerability was known.
1264 CVE-2018-11340 434 Exec Code 2018-05-21 2018-08-16
9.0
None Remote Low Single system Complete Complete Complete
An unrestricted file upload vulnerability in importuser.cgi in ASUSTOR AS6202T ADM 3.1.0.RFQ3 allows attackers to upload supplied data to a specified filename. This can be used to place attacker controlled code on the file system that is then executed.
1265 CVE-2018-11319 22 Exec Code Dir. Trav. 2018-05-20 2019-10-02
8.5
None Remote Medium Single system Complete Complete Complete
Syntastic (aka vim-syntastic) through 3.9.0 does not properly handle searches for configuration files (it searches the current directory up to potentially the root). This improper handling might be exploited for arbitrary code execution via a malicious gcc plugin, if an attacker has write access to a directory that is a parent of the base directory of the project being checked. NOTE: exploitation is more difficult after 3.8.0 because filename prediction may be needed.
1266 CVE-2018-11316 20 2018-07-03 2018-09-11
9.3
None Remote Medium Not required Complete Complete Complete
The UPnP HTTP server on Sonos wireless speaker products allow unauthorized access via a DNS rebinding attack. This can result in remote device control and privileged device and network information to be exfiltrated by an attacker.
1267 CVE-2018-11314 20 2018-07-03 2018-09-11
9.3
None Remote Medium Not required Complete Complete Complete
The External Control API in Roku and Roku TV products allow unauthorized access via a DNS Rebind attack. This can result in remote device control and privileged device and network information to be exfiltrated by an attacker.
1268 CVE-2018-11287 20 2018-09-20 2018-11-23
10.0
None Remote Low Not required Complete Complete Complete
In Snapdragon (Automobile, Mobile, Wear) in version MDM9206, MDM9607, MDM9650, MSM8909W, MSM8996AU, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 450, SD 625, SD 650/52, SD 820, SD 820A, SD 835, SD 845, SD 850, SDA660, SDM429, SDM439, SDM630, SDM632, SDM636, SDM660, SDM710, Snapdragon_High_Med_2016, incorrect control flow implementation in Video while checking buffer sufficiency.
1269 CVE-2018-11285 125 2018-09-20 2018-11-23
9.3
None Remote Medium Not required Complete Complete Complete
In Snapdragon (Automobile, Mobile, Wear) in version MDM9206, MDM9607, MDM9650, MSM8909W, MSM8996AU, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 450, SD 615/16/SD 415, SD 625, SD 650/52, SD 810, SD 820, SD 820A, SD 835, SD 845, SDA660, SDM429, SDM439, SDM630, SDM632, SDM636, SDM660, SDM710, SDX20, Snapdragon_High_Med_2016, while parsing FLAC file with corrupted picture block, a buffer over-read can occur.
1270 CVE-2018-11284 2019-01-18 2019-10-02
8.5
None Remote Low Not required None Partial Complete
Spoofed SMS can be used to send a large number of messages to the device which will in turn initiate a flood of registration updates with the server in snapdragon mobile and snapdragon wear in versions MDM9206, MDM9607, MDM9650, SD 210/SD 212/SD 205, SD 625, SD 636, SDA660, SDM630, SDM660, SDX20
1271 CVE-2018-11241 Exec Code 2018-09-21 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
An issue was discovered on SoftCase T-Router build 20112017 devices. A remote attacker can read and write to arbitrary files on the system as root, as demonstrated by code execution after writing to a crontab file. This is fixed in production builds as of Spring 2018.
1272 CVE-2018-11240 275 Exec Code 2018-09-21 2018-12-20
10.0
None Remote Low Not required Complete Complete Complete
An issue was discovered on SoftCase T-Router build 20112017 devices. There are no restrictions on the 'exec command' feature of the T-Router protocol. If the command syntax is correct, there is code execution both on the other modem and on the main servers. This is fixed in production builds as of Spring 2018.
1273 CVE-2018-11228 94 Exec Code 2018-06-07 2019-05-02
10.0
None Remote Low Not required Complete Complete Complete
Crestron TSW-1060, TSW-760, TSW-560, TSW-1060-NC, TSW-760-NC, and TSW-560-NC devices before 2.001.0037.001 allow unauthenticated remote code execution via a Bash shell service in Crestron Toolbox Protocol (CTP).
1274 CVE-2018-11220 Exec Code 2018-05-31 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
Bitmain Antminer D3, L3+, and S9 devices allow Remote Command Execution via the system restore function.
1275 CVE-2018-11194 732 2018-06-01 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 6 of 6).
1276 CVE-2018-11193 732 2018-06-01 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 5 of 6).
1277 CVE-2018-11192 732 2018-06-01 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 4 of 6).
1278 CVE-2018-11191 732 2018-06-01 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 3 of 6).
1279 CVE-2018-11190 269 2018-06-01 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 2 of 6).
1280 CVE-2018-11189 78 2018-06-01 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
Quest DR Series Disk Backup software version before 4.0.3.1 allows privilege escalation (issue 1 of 6).
1281 CVE-2018-11139 78 Exec Code 2018-05-31 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
The '/common/ajax_email_connection_test.php' script in the Quest KACE System Management Appliance 8.0.318 is accessible by any authenticated user and can be abused to execute arbitrary commands on the system. This script is vulnerable to command injection via the unsanitized user input 'TEST_SERVER' sent to the script via the POST method.
1282 CVE-2018-11138 78 Exec Code 2018-05-31 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
The '/common/download_agent_installer.php' script in the Quest KACE System Management Appliance 8.0.318 is accessible by anonymous users and can be abused to execute arbitrary commands on the system.
1283 CVE-2018-11134 640 2018-05-31 2018-06-29
9.0
None Remote Low Single system Complete Complete Complete
In order to perform actions that requires higher privileges, the Quest KACE System Management Appliance 8.0.318 relies on a message queue managed that runs with root privileges and only allows a set of commands. One of the available commands allows changing any user's password (including root). A low-privilege user could abuse this feature by changing the password of the 'kace_support' account, which comes disabled by default but has full sudo privileges.
1284 CVE-2018-11132 77 Exec Code 2018-05-31 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
In order to perform actions that require higher privileges, the Quest KACE System Management Appliance 8.0.318 relies on a message queue that runs daemonized with root privileges and only allows a set of commands to be executed. A command injection vulnerability exists within this message queue which allows low-privilege users to append arbitrary commands that will be run as root.
1285 CVE-2018-11094 798 2018-05-15 2018-06-22
10.0
None Remote Low Not required Complete Complete Complete
An issue was discovered on Intelbras NCLOUD 300 1.0 devices. /cgi-bin/ExportSettings.sh, /goform/updateWPS, /goform/RebootSystem, and /goform/vpnBasicSettings do not require authentication. For example, when an HTTP POST request is made to /cgi-bin/ExportSettings.sh, the username, password, and other details are retrieved.
1286 CVE-2018-11091 434 Exec Code 2018-05-14 2018-06-20
9.0
None Remote Low Single system Complete Complete Complete
An issue was discovered in MyBiz MyProcureNet 5.0.0. A malicious file can be uploaded to the webserver by an attacker. It is possible for an attacker to upload a script to issue operating system commands. This vulnerability occurs because an attacker is able to adjust the "HiddenFieldControlCustomWhiteListedExtensions" parameter and add arbitrary extensions to the whitelist during the upload. For instance, if the extension .asp is added to the "HiddenFieldControlCustomWhiteListedExtensions" parameter, the server accepts "secctest.asp" as a legitimate file. Hence malicious files can be uploaded in order to execute arbitrary commands to take over the server.
1287 CVE-2018-11066 Exec Code 2018-11-26 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
Dell EMC Avamar Client Manager in Dell EMC Avamar Server versions 7.2.0, 7.2.1, 7.3.0, 7.3.1, 7.4.0, 7.4.1, 7.5.0, 7.5.1, 18.1 and Dell EMC Integrated Data Protection Appliance (IDPA) versions 2.0, 2.1 and 2.2 contain a Remote Code Execution vulnerability. A remote unauthenticated attacker could potentially exploit this vulnerability to execute arbitrary commands on the server.
1288 CVE-2018-11061 Exec Code 2018-08-24 2019-10-09
9.0
None Remote Low Single system Complete Complete Complete
RSA NetWitness Platform versions prior to 11.1.0.2 and RSA Security Analytics versions prior to 10.6.6 are vulnerable to a server-side template injection vulnerability due to insecure configuration of the template engine used in the product. A remote authenticated malicious RSA NetWitness Server user with an Admin or Operator role could exploit this vulnerability to execute arbitrary commands on the server with root privileges.
1289 CVE-2018-11031 918 2018-05-13 2018-06-19
10.0
None Remote Low Not required Complete Complete Complete
application/home/controller/debug.php in PHPRAP 1.0.4 through 1.0.8 has SSRF via the /debug URI, as demonstrated by an api[url]=file:////etc/passwd&api[method]=get POST request.
1290 CVE-2018-11013 119 Exec Code Overflow 2018-05-13 2018-06-19
10.0
None Remote Low Not required Complete Complete Complete
Stack-based buffer overflow in the websRedirect function in GoAhead on D-Link DIR-816 A2 (CN) routers with firmware version 1.10B05 allows unauthenticated remote attackers to execute arbitrary code via a request with a long HTTP Host header.
1291 CVE-2018-10997 89 Sql 2018-06-17 2018-08-14
10.0
None Remote Low Not required Complete Complete Complete
Etere EtereWeb before 28.1.20 has a pre-authentication blind SQL injection in the POST parameters txUserName and txPassword.
1292 CVE-2018-10996 119 DoS Exec Code Overflow 2018-05-12 2018-06-18
10.0
None Remote Low Not required Complete Complete Complete
The weblogin_log function in /htdocs/cgibin on D-Link DIR-629-B1 devices allows attackers to execute arbitrary code or cause a denial of service (buffer overflow) via a session.cgi?ACTION=logout request involving a long REMOTE_ADDR environment variable.
1293 CVE-2018-10987 78 Exec Code 2018-07-05 2019-10-02
8.5
None Remote Medium Single system Complete Complete Complete
An issue was discovered on Dongguan Diqee Diqee360 devices. The affected vacuum cleaner suffers from an authenticated remote code execution vulnerability. An authenticated attacker can send a specially crafted UDP packet, and execute commands on the vacuum cleaner as root. The bug is in the function REQUEST_SET_WIFIPASSWD (UDP command 153). A crafted UDP packet runs "/mnt/skyeye/mode_switch.sh %s" with an attacker controlling the %s variable. In some cases, authentication can be achieved with the default password of 888888 for the admin account.
1294 CVE-2018-10967 78 Exec Code 2018-05-18 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
On D-Link DIR-550A and DIR-604M devices through v2.10KR, a malicious user can forge an HTTP request to inject operating system commands that can be executed on the device with higher privileges, aka remote code execution.
1295 CVE-2018-10897 22 Dir. Trav. 2018-08-01 2018-11-30
9.3
None Remote Medium Not required Complete Complete Complete
A directory traversal issue was found in reposync, a part of yum-utils, where reposync fails to sanitize paths in remote repository configuration files. If an attacker controls a repository, they may be able to copy files outside of the destination directory on the targeted system via path traversal. If reposync is running with heightened privileges on a targeted system, this flaw could potentially result in system compromise via the overwriting of critical system files. Version 1.1.31 and older are believed to be affected.
1296 CVE-2018-10843 732 2018-07-02 2019-10-09
9.0
None Remote Low Single system Complete Complete Complete
source-to-image component of Openshift Container Platform before versions atomic-openshift 3.7.53, atomic-openshift 3.9.31 is vulnerable to a privilege escalation which allows the assemble script to run as the root user in a non-privileged container. An attacker can use this flaw to open network connections, and possibly other actions, on the host which are normally only available to a root user.
1297 CVE-2018-10823 78 Exec Code 2018-10-17 2019-10-02
9.0
None Remote Low Single system Complete Complete Complete
An issue was discovered on D-Link DWR-116 through 1.06, DWR-512 through 2.02, DWR-712 through 2.02, DWR-912 through 2.02, DWR-921 through 2.02, and DWR-111 through 1.01 devices. An authenticated attacker may execute arbitrary code by injecting the shell command into the chkisg.htm page Sip parameter. This allows for full control over the device internals.
1298 CVE-2018-10750 119 Exec Code Overflow Mem. Corr. 2018-05-04 2018-06-12
9.3
None Remote Medium Not required Complete Complete Complete
An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'staticGet' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'staticGet <node_name attr>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.
1299 CVE-2018-10749 119 Exec Code Overflow Mem. Corr. 2018-05-04 2018-06-12
9.0
None Remote Low Single system Complete Complete Complete
An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'commit' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'commit <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.
1300 CVE-2018-10748 119 Exec Code Overflow Mem. Corr. 2018-05-04 2018-06-12
9.0
None Remote Low Single system Complete Complete Complete
An issue was discovered on D-Link DSL-3782 EU 1.01 devices. An authenticated user can pass a long buffer as a 'show' parameter to the '/userfs/bin/tcapi' binary (in the Diagnostics component) using the 'show <node_name>' function and cause memory corruption. Furthermore, it is possible to redirect the flow of the program and execute arbitrary code.
CVE is a registred trademark of the MITRE Corporation and the authoritative source of CVE content is MITRE's CVE web site. CWE is a registred trademark of the MITRE Corporation and the authoritative source of CWE content is MITRE's CWE web site. OVAL is a registered trademark of The MITRE Corporation and the authoritative source of OVAL content is MITRE's OVAL web site.
Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.