CVEdetails.com the ultimate security vulnerability data source
(e.g.: CVE-2009-1234 or 2010-1234 or 20101234)
Log In   Register
Vulnerability Feeds & WidgetsNew   www.itsecdb.com  

Security Vulnerabilities (CVSS score between 9 and 10)

Press ESC to close
# CVE ID CWE ID # of Exploits Vulnerability Type(s) Publish Date Update Date Score Gained Access Level Access Complexity Authentication Conf. Integ. Avail.
6901 CVE-2018-0035 2018-07-11 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
QFX5200 and QFX10002 devices that have been shipped with Junos OS 15.1X53-D21, 15.1X53-D30, 15.1X53-D31, 15.1X53-D32, 15.1X53-D33 and 15.1X53-D60 or have been upgraded to these releases using the .bin or .iso images may contain an unintended additional Open Network Install Environment (ONIE) partition. This additional partition allows the superuser to reboot to the ONIE partition which will wipe out the content of the Junos partition and its configuration. Once rebooted, the ONIE partition will not have root password configured, thus any user can access the console or SSH, using an IP address acquired from DHCP, as root without password. Once the device has been shipped or upgraded with the ONIE partition installed, the issue will persist. Simply upgrading to higher release via the CLI will not resolve the issue. No other Juniper Networks products or platforms are affected by this issue.
6902 CVE-2018-0040 798 2018-07-11 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
Juniper Networks Contrail Service Orchestrator versions prior to 4.0.0 use hardcoded cryptographic certificates and keys in some cases, which may allow network based attackers to gain unauthorized access to services.
6903 CVE-2018-0101 415 Exec Code 2018-01-29 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the Secure Sockets Layer (SSL) VPN functionality of the Cisco Adaptive Security Appliance (ASA) Software could allow an unauthenticated, remote attacker to cause a reload of the affected system or to remotely execute code. The vulnerability is due to an attempt to double free a region of memory when the webvpn feature is enabled on the Cisco ASA device. An attacker could exploit this vulnerability by sending multiple, crafted XML packets to a webvpn-configured interface on the affected system. An exploit could allow the attacker to execute arbitrary code and obtain full control of the system, or cause a reload of the affected device. This vulnerability affects Cisco ASA Software that is running on the following Cisco products: 3000 Series Industrial Security Appliance (ISA), ASA 5500 Series Adaptive Security Appliances, ASA 5500-X Series Next-Generation Firewalls, ASA Services Module for Cisco Catalyst 6500 Series Switches and Cisco 7600 Series Routers, ASA 1000V Cloud Firewall, Adaptive Security Virtual Appliance (ASAv), Firepower 2100 Series Security Appliance, Firepower 4110 Security Appliance, Firepower 9300 ASA Security Module, Firepower Threat Defense Software (FTD). Cisco Bug IDs: CSCvg35618.
6904 CVE-2018-0125 20 DoS Exec Code +Priv 2018-02-08 2019-10-09
10.0
Admin Remote Low Not required Complete Complete Complete
A vulnerability in the web interface of the Cisco RV132W ADSL2+ Wireless-N VPN and RV134W VDSL2 Wireless-AC VPN Routers could allow an unauthenticated, remote attacker to execute arbitrary code and gain full control of an affected system, including issuing commands with root privileges. The attacker could also cause an affected system to reload, resulting in a denial of service (DoS) condition. The vulnerability is due to an incomplete input validation on user-controlled input in an HTTP request to the targeted device. An attacker could exploit this vulnerability by sending a crafted HTTP request to an affected system. A successful exploit could allow the attacker to execute arbitrary code as the root user and gain full control of the affected system or cause it to reload, resulting in a DoS condition. This vulnerability is fixed in firmware version 1.0.1.11 for the following Cisco products: RV132W ADSL2+ Wireless-N VPN Router and RV134W VDSL2 Wireless-AC VPN Router. Cisco Bug IDs: CSCvg92737, CSCvh60170.
6905 CVE-2018-0147 20 Exec Code 2018-03-08 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in Java deserialization used by Cisco Secure Access Control System (ACS) prior to release 5.8 patch 9 could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected device. The vulnerability is due to insecure deserialization of user-supplied content by the affected software. An attacker could exploit this vulnerability by sending a crafted serialized Java object. An exploit could allow the attacker to execute arbitrary commands on the device with root privileges. Cisco Bug IDs: CSCvh25988.
6906 CVE-2018-0150 798 2018-03-28 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in Cisco IOS XE Software could allow an unauthenticated, remote attacker to log in to a device running an affected release of Cisco IOS XE Software with the default username and password that are used at initial boot, aka a Static Credential Vulnerability. The vulnerability is due to an undocumented user account with privilege level 15 that has a default username and password. An attacker could exploit this vulnerability by using this account to remotely connect to an affected device. A successful exploit could allow the attacker to log in to the device with privilege level 15 access. This vulnerability affects Cisco devices that are running a vulnerable release of Cisco IOS XE Software Release 16.x. This vulnerability does not affect Cisco IOS XE Software releases prior to Release 16.x. Cisco Bug IDs: CSCve89880.
6907 CVE-2018-0151 119 DoS Exec Code Overflow 2018-03-28 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the quality of service (QoS) subsystem of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition or execute arbitrary code with elevated privileges. The vulnerability is due to incorrect bounds checking of certain values in packets that are destined for UDP port 18999 of an affected device. An attacker could exploit this vulnerability by sending malicious packets to an affected device. When the packets are processed, an exploitable buffer overflow condition may occur. A successful exploit could allow the attacker to execute arbitrary code on the affected device with elevated privileges. The attacker could also leverage this vulnerability to cause the device to reload, causing a temporary DoS condition while the device is reloading. The malicious packets must be destined to and processed by an affected device. Traffic transiting a device will not trigger the vulnerability. Cisco Bug IDs: CSCvf73881.
6908 CVE-2018-0171 119 DoS Exec Code Overflow 2018-03-28 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the Smart Install feature of Cisco IOS Software and Cisco IOS XE Software could allow an unauthenticated, remote attacker to trigger a reload of an affected device, resulting in a denial of service (DoS) condition, or to execute arbitrary code on an affected device. The vulnerability is due to improper validation of packet data. An attacker could exploit this vulnerability by sending a crafted Smart Install message to an affected device on TCP port 4786. A successful exploit could allow the attacker to cause a buffer overflow on the affected device, which could have the following impacts: Triggering a reload of the device, Allowing the attacker to execute arbitrary code on the device, Causing an indefinite loop on the affected device that triggers a watchdog crash. Cisco Bug IDs: CSCvg76186.
6909 CVE-2018-0222 798 Exec Code 2018-05-16 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to log in to an affected system by using an administrative account that has default, static user credentials. The vulnerability is due to the presence of undocumented, static user credentials for the default administrative account for the affected software. An attacker could exploit this vulnerability by using the account to log in to an affected system. A successful exploit could allow the attacker to log in to the affected system and execute arbitrary commands with root privileges. This vulnerability affects all releases of Cisco DNA Center Software prior to Release 1.1.3. Cisco Bug IDs: CSCvh98929.
6910 CVE-2018-0253 20 Exec Code 2018-05-02 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the ACS Report component of Cisco Secure Access Control System (ACS) could allow an unauthenticated, remote attacker to execute arbitrary commands on an affected system. Commands executed by the attacker are processed at the targeted user's privilege level. The vulnerability is due to insufficient validation of the Action Message Format (AMF) protocol. An attacker could exploit this vulnerability by sending a crafted AMF message that contains malicious code to a targeted user. A successful exploit could allow the attacker to execute arbitrary commands on the ACS device. This vulnerability affects all releases of Cisco Secure ACS prior to Release 5.8 Patch 7. Cisco Bug IDs: CSCve69037.
6911 CVE-2018-0258 22 Dir. Trav. 2018-05-02 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the Cisco Prime File Upload servlet affecting multiple Cisco products could allow a remote attacker to upload arbitrary files to any directory of a vulnerable device (aka Path Traversal) and execute those files. This vulnerability affects the following products: Cisco Prime Data Center Network Manager (DCNM) Version 10.0 and later, and Cisco Prime Infrastructure (PI) All versions. Cisco Bug IDs: CSCvf32411, CSCvf81727.
6912 CVE-2018-0268 358 Exec Code +Priv Bypass 2018-05-16 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the container management subsystem of Cisco Digital Network Architecture (DNA) Center could allow an unauthenticated, remote attacker to bypass authentication and gain elevated privileges. This vulnerability is due to an insecure default configuration of the Kubernetes container management subsystem within DNA Center. An attacker who has the ability to access the Kubernetes service port could execute commands with elevated privileges within provisioned containers. A successful exploit could result in a complete compromise of affected containers. This vulnerability affects Cisco DNA Center Software Releases 1.1.3 and prior. Cisco Bug IDs: CSCvi47253.
6913 CVE-2018-0301 119 Exec Code Overflow 2018-06-20 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the NX-API feature of Cisco NX-OS Software could allow an unauthenticated, remote attacker to craft a packet to the management interface on an affected system, causing a buffer overflow. The vulnerability is due to incorrect input validation in the authentication module of the NX-API subsystem. An attacker could exploit this vulnerability by sending a crafted HTTP or HTTPS packet to the management interface of an affected system with the NX-API feature enabled. An exploit could allow the attacker to execute arbitrary code as root. Note: NX-API is disabled by default. This vulnerability affects: MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules. Cisco Bug IDs: CSCvd45804, CSCve02322, CSCve02412.
6914 CVE-2018-0304 125 DoS Exec Code Overflow 2018-06-20 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to read sensitive memory content, create a denial of service (DoS) condition, or execute arbitrary code as root. The vulnerability exists because the affected software insufficiently validates Cisco Fabric Services packet headers. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overflow or buffer overread condition in the Cisco Fabric Services component, which could allow the attacker to read sensitive memory content, create a DoS condition, or execute arbitrary code as root. This vulnerability affects the following if configured to use Cisco Fabric Services: Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69951, CSCve02459, CSCve02461, CSCve02463, CSCve02474, CSCve04859.
6915 CVE-2018-0310 125 DoS +Info 2018-06-21 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the Cisco Fabric Services component of Cisco FXOS Software and Cisco NX-OS Software could allow an unauthenticated, remote attacker to obtain sensitive information from memory or cause a denial of service (DoS) condition on the affected product. The vulnerability exists because the affected software insufficiently validates header values in Cisco Fabric Services packets. An attacker could exploit this vulnerability by sending a crafted Cisco Fabric Services packet to an affected device. A successful exploit could allow the attacker to cause a buffer overread condition, which could allow the attacker to obtain sensitive information from memory or cause a DoS condition on the affected product. This vulnerability affects Firepower 4100 Series Next-Generation Firewalls, Firepower 9300 Security Appliance, MDS 9000 Series Multilayer Switches, Nexus 2000 Series Fabric Extenders, Nexus 3000 Series Switches, Nexus 3500 Platform Switches, Nexus 5500 Platform Switches, Nexus 5600 Platform Switches, Nexus 6000 Series Switches, Nexus 7000 Series Switches, Nexus 7700 Series Switches, Nexus 9000 Series Switches in standalone NX-OS mode, Nexus 9500 R-Series Line Cards and Fabric Modules, UCS 6100 Series Fabric Interconnects, UCS 6200 Series Fabric Interconnects, UCS 6300 Series Fabric Interconnects. Cisco Bug IDs: CSCvd69957, CSCve02435, CSCve04859, CSCve41536, CSCve41538, CSCve41559.
6916 CVE-2018-0349 20 2018-07-18 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the Cisco SD-WAN Solution could allow an authenticated, remote attacker to overwrite arbitrary files on the underlying operating system of an affected device. The vulnerability is due to improper input validation of the request admin-tech command in the CLI of the affected software. An attacker could exploit this vulnerability by modifying the request admin-tech command in the CLI of an affected device. A successful exploit could allow the attacker to overwrite arbitrary files on the underlying operating system of an affected device and escalate their privileges to the root user. This vulnerability affects the following Cisco products if they are running a release of the Cisco SD-WAN Solution prior to Release 18.3.0: vBond Orchestrator Software, vEdge 100 Series Routers, vEdge 1000 Series Routers, vEdge 2000 Series Routers, vEdge 5000 Series Routers, vEdge Cloud Router Platform, vManage Network Management Software, vSmart Controller Software. Cisco Bug IDs: CSCvi69852, CSCvi69856.
6917 CVE-2018-0375 798 Exec Code 2018-07-18 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in the Cluster Manager of Cisco Policy Suite before 18.2.0 could allow an unauthenticated, remote attacker to log in to an affected system using the root account, which has default, static user credentials. The vulnerability is due to the presence of undocumented, static user credentials for the root account. An attacker could exploit this vulnerability by using the account to log in to an affected system. An exploit could allow the attacker to log in to the affected system and execute arbitrary commands as the root user. Cisco Bug IDs: CSCvh02680.
6918 CVE-2018-0506 78 Exec Code 2018-01-26 2018-02-13
10.0
None Remote Low Not required Complete Complete Complete
Nootka 1.4.4 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.
6919 CVE-2018-0514 78 Exec Code 2018-02-08 2018-03-10
10.0
None Remote Low Not required Complete Complete Complete
MP Form Mail CGI eCommerce Edition Ver 2.0.13 and earlier allows remote attackers to execute arbitrary OS commands via unspecified vectors.
6920 CVE-2018-0539 78 Exec Code 2018-03-22 2018-04-13
10.0
None Remote Low Not required Complete Complete Complete
QQQ SYSTEMS version 2.24 allows an attacker to execute arbitrary commands via unspecified vectors.
6921 CVE-2018-0541 119 Exec Code Overflow 2018-03-22 2018-04-17
10.0
None Remote Low Not required Complete Complete Complete
Buffer overflow in Tiny FTP Daemon Ver0.52d allows an attacker to cause a denial-of-service (DoS) condition or execute arbitrary code via unspecified vectors.
6922 CVE-2018-0545 78 Exec Code 2018-04-09 2018-05-15
10.0
None Remote Low Not required Complete Complete Complete
LXR version 1.0.0 to 2.3.0 allows remote attackers to execute arbitrary OS commands via unspecified vectors.
6923 CVE-2018-0694 78 Exec Code 2018-11-15 2018-12-17
10.0
None Remote Low Not required Complete Complete Complete
FileZen V3.0.0 to V4.2.1 allows remote attackers to execute arbitrary OS commands via unspecified vectors.
6924 CVE-2018-0721 119 Overflow 2018-11-27 2018-12-27
10.0
None Remote Low Not required Complete Complete Complete
Buffer Overflow vulnerability in QNAP QTS 4.2.6 build 20180711 and earlier versions, 4.3.3 build 20180725 and earlier versions, and 4.3.4 build 20180710 and earlier versions could allow remote attackers to run arbitrary code on NAS devices.
6925 CVE-2018-1085 287 2018-06-15 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
openshift-ansible before versions 3.9.23, 3.7.46 deploys a misconfigured etcd file that causes the SSL client certificate authentication to be disabled. Quotations around the values of ETCD_CLIENT_CERT_AUTH and ETCD_PEER_CLIENT_CERT_AUTH in etcd.conf result in etcd being configured to allow remote users to connect without any authentication if they can access the etcd server bound to the network on the master nodes. An attacker could use this flaw to read and modify all the data about the Openshift cluster in the etcd datastore, potentially adding another compute node, or bringing down the entire cluster.
6926 CVE-2018-1143 78 Exec Code 2018-04-19 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to twonky_command.cgi.
6927 CVE-2018-1144 78 Exec Code 2018-04-19 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
A remote unauthenticated user can execute commands as root in the Belkin N750 using firmware version 1.10.22 by sending a crafted HTTP request to proxy.cgi.
6928 CVE-2018-1149 119 Exec Code Overflow 2018-09-19 2018-12-07
10.0
None Remote Low Not required Complete Complete Complete
cgi_system in NUUO's NVRMini2 3.8.0 and below allows remote attackers to execute arbitrary code via crafted HTTP requests.
6929 CVE-2018-1151 119 DoS Exec Code Overflow 2018-06-12 2019-05-28
10.0
None Remote Low Not required Complete Complete Complete
The web server on Western Digital TV Media Player 1.03.07 and TV Live Hub 3.12.13 allow unauthenticated remote attackers to execute arbitrary code or cause denial of service via crafted HTTP requests to toServerValue.cgi.
6930 CVE-2018-1160 787 Exec Code 2018-12-20 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
Netatalk before 3.1.12 is vulnerable to an out of bounds write in dsi_opensess.c. This is due to lack of bounds checking on attacker controlled data. A remote unauthenticated attacker can leverage this vulnerability to achieve arbitrary code execution.
6931 CVE-2018-1161 20 Exec Code 2018-02-08 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
This vulnerability allows remote attackers to execute arbitrary code on vulnerable installations of Quest NetVault Backup 11.2.0.13. Authentication is not required to exploit this vulnerability. The specific flaw exists within nvwsworker.exe. When parsing the boundary header of a multipart request, the process does not properly validate the length of user-supplied data prior to copying it to a stack-based buffer. An attacker can leverage this vulnerability to execute code under the context of SYSTEM. Was ZDI-CAN-4215.
6932 CVE-2018-1163 Exec Code Bypass 2018-02-08 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
This vulnerability allows remote attackers to bypass authentication on vulnerable installations of Quest NetVault Backup 11.2.0.13. The specific flaw exists within JSON RPC Request handling. By setting the checksession parameter to a specific value, it is possible to bypass authentication to critical functions. An attacker can leverage this in conjunction with other vulnerabilities to execute arbitrary code in the context of SYSTEM. Was ZDI-CAN-4752.
6933 CVE-2018-1164 732 2018-02-21 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
This vulnerability allows remote attackers to cause a denial-of-service condition on vulnerable installations of ZyXEL P-870H-51 DSL Router 1.00(AWG.3)D5. Authentication is not required to exploit this vulnerability. The specific flaw exists within numerous exposed CGI endpoints. The vulnerability is caused by improper access controls that allow access to critical functions without authentication. An attacker can use this vulnerability to reboot affected devices, along with other actions. Was ZDI-CAN-4540.
6934 CVE-2018-1216 798 2018-03-08 2018-03-29
10.0
None Remote Low Not required Complete Complete Complete
A hard-coded password vulnerability was discovered in vApp Manager which is embedded in Dell EMC Unisphere for VMAX, Dell EMC Solutions Enabler, Dell EMC VASA Virtual Appliances, and Dell EMC VMAX Embedded Management (eManagement): Dell EMC Unisphere for VMAX Virtual Appliance versions prior to 8.4.0.18, Dell EMC Solutions Enabler Virtual Appliance versions prior to 8.4.0.21, Dell EMC VASA Virtual Appliance versions prior to 8.4.0.514, and Dell EMC VMAX Embedded Management (eManagement) versions prior to and including 1.4 (Enginuity Release 5977.1125.1125 and earlier). They contain an undocumented default account (smc) with a hard-coded password that may be used with certain web servlets. A remote attacker with the knowledge of the hard-coded password and the message format may use vulnerable servlets to gain unauthorized access to the system. Note: This account cannot be used to log in via the web user interface.
6935 CVE-2018-1235 78 Exec Code 2018-05-29 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
Dell EMC RecoverPoint versions prior to 5.1.2 and RecoverPoint for VMs versions prior to 5.1.1.3, contain a command injection vulnerability. An unauthenticated remote attacker may potentially exploit this vulnerability to execute arbitrary commands on the affected system with root privilege.
6936 CVE-2018-1469 Exec Code 2018-04-04 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
IBM API Connect Developer Portal 5.0.0.0 through 5.0.8.2 could allow an unauthenticated attacker to execute system commands using specially crafted HTTP requests. IBM X-Force ID: 140605.
6937 CVE-2018-1722 Exec Code 2018-08-24 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
IBM Security Access Manager Appliance 9.0.4.0 and 9.0.5.0 could allow remote code execution when Advanced Access Control or Federation services are running. IBM X-Force ID: 147370.
6938 CVE-2018-1822 287 Bypass 2018-10-18 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
IBM FlashSystem 900 product GUI allows a specially crafted attack to bypass the authentication requirements of the system, resulting in the ability to remotely change the superuser password. This can be used by an attacker to gain administrative control or to deny service. IBM X-Force ID: 150296.
6939 CVE-2018-3586 190 Overflow 2018-07-06 2018-08-28
10.0
None Remote Low Not required Complete Complete Complete
An integer overflow to buffer overflow vulnerability exists in the ADSPRPC heap manager in all Android releases(Android for MSM, Firefox OS for MSM, QRD Android) from CAF using the Linux kernel.
6940 CVE-2018-3589 119 Overflow 2018-04-11 2018-05-15
10.0
None Remote Low Not required Complete Complete Complete
In Android before security patch level 2018-04-05 on Qualcomm Snapdragon Mobile MDM9650, MDM9655, SD 835, SD 845, SD 850, the vswr capture size is larger than the maximum size of a diag logPacket, which can lead to a buffer overflow when the sample buffer is copied to the logPacket buffer.
6941 CVE-2018-3590 416 2018-04-11 2018-05-15
10.0
None Remote Low Not required Complete Complete Complete
In Android before security patch level 2018-04-05 on Qualcomm Snapdragon Mobile and Snapdragon Wear MSM8909W, SD 210/SD 212/SD 205, SD 450, SD 615/16/SD 415, SD 625, SD 650/52, SD 820, SD 835, SD 845, a Use After Free condition can occur in RIL while handling requests from Android.
6942 CVE-2018-3591 1188 2018-04-11 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
In Android before security patch level 2018-04-05 on Qualcomm Snapdragon Mobile and Snapdragon Wear MDM9206, MDM9607, MDM9635M, MDM9650, MDM9655, SD 210/SD 212/SD 205, SD 410/12, SD 425, SD 427, SD 430, SD 435, SD 450, SD 615/16/SD 415, SD 625, SD 650/52, SD 820, SD 835, SD 845, SDM630, SDM636, SDM660, Snapdragon_High_Med_2016, the default build configuration of deviceprogrammer in BOOT.BF.3.0 enables the flag SKIP_SECBOOT_CHECK_NOT_RECOMMENDED_BY_QUALCOMM which will open up the peek and poke commands to any memory location on the target.
6943 CVE-2018-3592 476 2018-04-11 2018-05-11
10.0
None Remote Low Not required Complete Complete Complete
In Android before security patch level 2018-04-05 on Qualcomm Snapdragon Mobile and Snapdragon Wear MDM9206, MDM9607, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8909W, SD 210/SD 212/SD 205, SD 425, SD 430, SD 450, SD 625, SD 650/52, SD 820, SD 835, SD 845, SD 850, added a change to check if the pointer has been reset to NULL or not, before writing to the memory pointed by the pointer.
6944 CVE-2018-3593 415 2018-04-11 2018-05-15
10.0
None Remote Low Not required Complete Complete Complete
In Android before security patch level 2018-04-05 on Qualcomm Snapdragon Automobile, Snapdragon Mobile, and Snapdragon Wear MDM9206, MDM9607, MDM9650, MSM8909W, SD 210/SD 212/SD 205, SD 400, SD 425, SD 430, SD 450, SD 615/16/SD 415, SD 617, SD 625, SD 650/52, SD 808, SD 810, SD 820, SD 820A, SD 835, SD 845, repeated enable/disable eMBMS requests may result in a double free condition.
6945 CVE-2018-3594 125 2018-04-11 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
In Android before security patch level 2018-04-05 on Qualcomm Snapdragon Automobile, Snapdragon Mobile, and Snapdragon Wear MDM9206, MDM9607, MDM9650, SD 210/SD 212/SD 205, SD 425, SD 430, SD 450, SD 615/16/SD 415, SD 617, SD 625, SD 650/52, SD 808, SD 820, SD 820A, SD 835, SD 845, while parsing a private frame in an ID3 tag, a buffer over-read can occur when comparing frame data with predefined owner identifier strings.
6946 CVE-2018-3608 94 2018-07-06 2018-08-28
10.0
None Remote Low Not required Complete Complete Complete
A vulnerability in Trend Micro Maximum Security's (Consumer) 2018 (versions 12.0.1191 and below) User-Mode Hooking (UMH) driver could allow an attacker to create a specially crafted packet that could alter a vulnerable system in such a way that malicious code could be injected into other processes.
6947 CVE-2018-3746 78 Exec Code 2018-06-01 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
The pdfinfojs NPM module versions <= 0.3.6 has a command injection vulnerability that allows an attacker to execute arbitrary commands on the victim's machine.
6948 CVE-2018-3757 78 2018-06-01 2019-10-02
10.0
None Remote Low Not required Complete Complete Complete
Command injection exists in pdf-image v2.0.0 due to an unescaped string parameter.
6949 CVE-2018-3779 Exec Code 2018-08-10 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
active-support ruby gem 5.2.0 could allow a remote attacker to execute arbitrary code on the system, caused by containing a malicious backdoor. An attacker could exploit this vulnerability to execute arbitrary code on the system.
6950 CVE-2018-3785 78 Exec Code 2018-08-17 2019-10-09
10.0
None Remote Low Not required Complete Complete Complete
A command injection in git-dummy-commit v1.3.0 allows os level commands to be executed due to an unescaped parameter.
CVE is a registred trademark of the MITRE Corporation and the authoritative source of CVE content is MITRE's CVE web site. CWE is a registred trademark of the MITRE Corporation and the authoritative source of CWE content is MITRE's CWE web site. OVAL is a registered trademark of The MITRE Corporation and the authoritative source of OVAL content is MITRE's OVAL web site.
Use of this information constitutes acceptance for use in an AS IS condition. There are NO warranties, implied or otherwise, with regard to this information or its use. Any use of this information is at the user's risk. It is the responsibility of user to evaluate the accuracy, completeness or usefulness of any information, opinion, advice or other content. EACH USER WILL BE SOLELY RESPONSIBLE FOR ANY consequences of his or her direct or indirect use of this web site. ALL WARRANTIES OF ANY KIND ARE EXPRESSLY DISCLAIMED. This site will NOT BE LIABLE FOR ANY DIRECT, INDIRECT or any other kind of loss.