Security Vulnerabilities CVSS score between 8 and 8.99

In EVE OS, the “measured boot” mechanism prevents a compromised device from accessing the encrypted data located in the vault. As per the “measured boot” design, the PCR values calculated at different stages of the boot process will change if any of their respective parts are changed. This includes, among other things, the configuration of the bios, grub, the kernel cmdline, initrd, and more. However, this mechanism does not validate the entire rootfs, so an attacker can edit the filesystem and gain control over the system. As the default filesystem used by EVE OS is squashfs, this is somewhat harder than an ext4, which is easily changeable. This will not stop an attacker, as an attacker can repackage the squashfs with their changes in it and replace the partition altogether. This can also be done directly on the device, as the “003-storage-init” container contains the “mksquashfs” and “unsquashfs” binaries (with the corresponding libs). An attacker can gain full control over the device without changing the PCR values, thus not triggering the “measured boot” mechanism, and having full access to the vault. Note: This issue was partially fixed in these commits (after disclosure to Zededa), where the config partition measurement was added to PCR13: • aa3501d6c57206ced222c33aea15a9169d629141 • 5fef4d92e75838cc78010edaed5247dfbdae1889. This issue was made viable in version 9.0.0 when the calculation was moved to PCR14 but it was not included in the measured boot.

Vault Key Sealed With SHA1 PCRs The measured boot solution implemented in EVE OS leans on a PCR locking mechanism. Different parts of the system update different PCR values in the TPM, resulting in a unique value for each PCR entry. These PCRs are then used in order to seal/unseal a key from the TPM which is used to encrypt/decrypt the “vault” directory. This “vault” directory is the most sensitive point in the system and as such, its content should be protected. This mechanism is noted in Zededa’s documentation as the “measured boot” mechanism, designed to protect said “vault”. The code that’s responsible for generating and fetching the key from the TPM assumes that SHA256 PCRs are used in order to seal/unseal the key, and as such their presence is being checked. The issue here is that the key is not sealed using SHA256 PCRs, but using SHA1 PCRs. This leads to several issues: • Machines that have their SHA256 PCRs enabled but SHA1 PCRs disabled, as well as not sealing their keys at all, meaning the “vault” is not protected from an attacker. • SHA1 is considered insecure and reduces the complexity level required to unseal the key in machines which have their SHA1 PCRs enabled. An attacker can very easily retrieve the contents of the “vault”, which will effectively render the “measured boot” mechanism meaningless.

When sealing/unsealing the “vault” key, a list of PCRs is used, which defines which PCRs are used. In a previous project, CYMOTIVE found that the configuration is not protected by the secure boot, and in response Zededa implemented measurements on the config partition that was mapped to PCR 13. In that process, PCR 13 was added to the list of PCRs that seal/unseal the key. In commit “56e589749c6ff58ded862d39535d43253b249acf”, the config partition measurement moved from PCR 13 to PCR 14, but PCR 14 was not added to the list of PCRs that seal/unseal the key. This change makes the measurement of PCR 14 effectively redundant as it would not affect the sealing/unsealing of the key. An attacker could modify the config partition without triggering the measured boot, this could result in the attacker gaining full control over the device with full access to the contents of the encrypted “vault”

On boot, the Pillar eve container checks for the existence and content of “/config/GlobalConfig/global.json”. If the file exists, it overrides the existing configuration on the device on boot. This allows an attacker to change the system’s configuration, which also includes some debug functions. This could be used to unlock the ssh with custom “authorized_keys” via the “debug.enable.ssh” key, similar to the “authorized_keys” finding that was noted before. Other usages include unlocking the usb to enable the keyboard via the “debug.enable.usb” key, allowing VNC access via the “app.allow.vnc” key, and more. An attacker could easily enable these debug functionalities without triggering the “measured boot” mechanism implemented by EVE OS, and without marking the device as “UUD” (“Unknown Update Detected”). This is because the “/config” partition is not protected by “measured boot”, it is mutable and it is not encrypted in any way. An attacker can gain full control over the device without changing the PCR values, thereby not triggering the “measured boot” mechanism, and having full access to the vault. Note: This issue was partially fixed in these commits (after disclosure to Zededa), where the config partition measurement was added to PCR13: • aa3501d6c57206ced222c33aea15a9169d629141 • 5fef4d92e75838cc78010edaed5247dfbdae1889. This issue was made viable in version 9.0.0 when the calculation was moved to PCR14 but it was not included in the measured boot.

On boot, the Pillar eve container checks for the existence and content of “/config/authorized_keys”. If the file is present, and contains a supported public key, the container will go on to open port 22 and enable sshd with the given keys as the authorized keys for root login. An attacker could easily add their own keys and gain full control over the system without triggering the “measured boot” mechanism implemented by EVE OS, and without marking the device as “UUD” (“Unknown Update Detected”). This is because the “/config” partition is not protected by “measured boot”, it is mutable, and it is not encrypted in any way. An attacker can gain full control over the device without changing the PCR values, thus not triggering the “measured boot” mechanism, and having full access to the vault. Note: This issue was partially fixed in these commits (after disclosure to Zededa), where the config partition measurement was added to PCR13: • aa3501d6c57206ced222c33aea15a9169d629141 • 5fef4d92e75838cc78010edaed5247dfbdae1889. This issue was made viable in version 9.0.0 when the calculation was moved to PCR14 but it was not included in the measured boot.

PCR14 is not in the list of PCRs that seal/unseal the “vault” key, but due to the change that was implemented in commit “7638364bc0acf8b5c481b5ce5fea11ad44ad7fd4”, fixing this issue alone would not solve the problem of the config partition not being measured correctly. Also, the “vault” key is sealed/unsealed with SHA1 PCRs instead of SHA256. This issue was somewhat mitigated due to all of the PCR extend functions updating both the values of SHA256 and SHA1 for a given PCR ID. However, due to the change that was implemented in commit “7638364bc0acf8b5c481b5ce5fea11ad44ad7fd4”, this is no longer the case for PCR14, as the code in “measurefs.go” explicitly updates only the SHA256 instance of PCR14, which means that even if PCR14 were to be added to the list of PCRs sealing/unsealing the “vault” key, changes to the config partition would still not be measured. An attacker could modify the config partition without triggering the measured boot, this could result in the attacker gaining full control over the device with full access to the contents of the encrypted “vault”

A cross-site request forgery (CSRF) vulnerability in Jenkins Build Failure Analyzer Plugin 2.4.1 and earlier allows attackers to connect to an attacker-specified hostname and port using attacker-specified username and password.

In Jenkins 2.423 and earlier, LTS 2.414.1 and earlier, processing file uploads using MultipartFormDataParser creates temporary files in the default system temporary directory with the default permissions for newly created files, potentially allowing attackers with access to the Jenkins controller file system to read and write the files before they are used.

In Jenkins 2.423 and earlier, LTS 2.414.1 and earlier, processing file uploads using the Stapler web framework creates temporary files in the default system temporary directory with the default permissions for newly created files, potentially allowing attackers with access to the Jenkins controller file system to read and write the files before they are used.

Jenkins 2.423 and earlier, LTS 2.414.1 and earlier creates a temporary file in the system temporary directory with the default permissions for newly created files when installing a plugin from a URL, potentially allowing attackers with access to the system temporary directory to replace the file before it is installed in Jenkins, potentially resulting in arbitrary code execution.

The ping_from parameter of ping_tracerte.cgi in the web UI of Telstra Smart Modem Gen 2 (Arcadyan LH1000), firmware versions < 0.18.15r, was not properly sanitized before being used in a system call, which could allow an authenticated attacker to achieve command injection as root on the device. 

TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds NAPT rules after authentication, and the rule name has an injection point.

TPLINK TL-ER5120G 4.0 2.0.0 Build 210817 Rel.80868n has a command injection vulnerability, when an attacker adds ACL rules after authentication, and the rule name parameter has injection points.

AutomataCI is a template git repository equipped with a native built-in semi-autonomous CI tools. An issue in versions 1.4.1 and below can let a release job reset the git root repository to the first commit. Version 1.5.0 has a patch for this issue. As a workaround, make sure the `PROJECT_PATH_RELEASE` (e.g. `releases/`) directory is manually and actually `git cloned` properly, making it a different git repostiory from the root git repository.

In Progress MOVEit Transfer versions released before 2021.1.8 (13.1.8), 2022.0.8 (14.0.8), 2022.1.9 (14.1.9), 2023.0.6 (15.0.6), a SQL injection vulnerability has been identified in the MOVEit Transfer machine interface that could allow an authenticated attacker to gain unauthorized access to the MOVEit Transfer database. An attacker could submit a crafted payload to the MOVEit Transfer machine interface which could result in modification and disclosure of MOVEit database content.

Due to insufficient file type validation, SAP BusinessObjects Business Intelligence Platform (Web Intelligence HTML interface) - version 420, allows a report creator to upload files from local system into the report over the network. When uploading the image file, an authenticated attacker could intercept the request, modify the content type and the extension to read and modify sensitive data causing a high impact on confidentiality and integrity of the application.

blurhash-rs is a pure Rust implementation of Blurhash, software for encoding images into ASCII strings that can be turned into a gradient of colors representing the original image. In version 0.1.1, the blurhash parsing code may panic due to multiple panic-guarded out-of-bounds accesses on untrusted input. In a typical deployment, this may get triggered by feeding a maliciously crafted blurhashes over the network. These may include UTF-8 compliant strings containing multi-byte UTF-8 characters. A patch is available in version 0.2.0, which requires user intervention because of slight API churn. No known workarounds are available.

phonenumber is a library for parsing, formatting and validating international phone numbers. Prior to versions `0.3.3+8.13.9` and `0.2.5+8.11.3`, the phonenumber parsing code may panic due to a panic-guarded out-of-bounds access on the phonenumber string. In a typical deployment of `rust-phonenumber`, this may get triggered by feeding a maliciously crafted phonenumber over the network, specifically the string `.;phone-context=`. Versions `0.3.3+8.13.9` and `0.2.5+8.11.3` contain a patch for this issue. There are no known workarounds.

Vyper is a Pythonic Smart Contract Language for the Ethereum Virtual Machine (EVM). In version 0.3.9 and prior, under certain conditions, the memory used by the builtins `raw_call`, `create_from_blueprint` and `create_copy_of` can be corrupted. For `raw_call`, the argument buffer of the call can be corrupted, leading to incorrect `calldata` in the sub-context. For `create_from_blueprint` and `create_copy_of`, the buffer for the to-be-deployed bytecode can be corrupted, leading to deploying incorrect bytecode. Each builtin has conditions that must be fulfilled for the corruption to happen. For `raw_call`, the `data` argument of the builtin must be `msg.data` and the `value` or `gas` passed to the builtin must be some complex expression that results in writing to the memory. For `create_copy_of`, the `value` or `salt` passed to the builtin must be some complex expression that results in writing to the memory. For `create_from_blueprint`, either no constructor parameters should be passed to the builtin or `raw_args` should be set to True, and the `value` or `salt` passed to the builtin must be some complex expression that results in writing to the memory. As of time of publication, no patched version exists. The issue is still being investigated, and there might be other cases where the corruption might happen. When the builtin is being called from an `internal` function `F`, the issue is not present provided that the function calling `F` wrote to memory before calling `F`. As a workaround, the complex expressions that are being passed as kwargs to the builtin should be cached in memory prior to the call to the builtin.

JumpServer is an open source bastion host and a professional operation and maintenance security audit system. Starting in version 3.0.0 and prior to versions 3.5.5 and 3.6.4, session replays can download without authentication. Session replays stored in S3, OSS, or other cloud storage are not affected. The api `/api/v1/terminal/sessions/` permission control is broken and can be accessed anonymously. SessionViewSet permission classes set to `[RBACPermission | IsSessionAssignee]`, relation is or, so any permission matched will be allowed. Versions 3.5.5 and 3.6.4 have a fix. After upgrading, visit the api `$HOST/api/v1/terminal/sessions/?limit=1`. The expected http response code is 401 (`not_authenticated`).

Unrestricted File Upload vulnerability in Fl3xx Dispatch 2.10.37 and fl3xx Crew 2.10.37 allows a remote attacker to execute arbitrary code via the add attachment function in the New Expense component.

A file upload vulnerability in EliteCMS 1.01 allows a remote attacker to execute arbitrary code via the manage_uploads.php component.

An issue in PeppermintLabs Peppermint v.0.2.4 and before allows a remote attacker to obtain sensitive information and execute arbitrary code via the hardcoded session cookie.

Cross Site Request Forgery (CSRF) vulnerability in icmsdev iCMSv.7.0.16 allows a remote attacker to execute arbitrary code via the user.admincp.php, members.admincp.php, and group.admincp.php files.

Grocy <= 4.0.2 is vulnerable to Cross Site Request Forgery (CSRF).