Security Vulnerabilities, CVEs, related to CWE-400 CVSS score >= 8

A vulnerability in the External Border Gateway Protocol (eBGP) implementation of Cisco NX-OS Software could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition on an affected device. This vulnerability exists because eBGP traffic is mapped to a shared hardware rate-limiter queue. An attacker could exploit this vulnerability by sending large amounts of network traffic with certain characteristics through an affected device. A successful exploit could allow the attacker to cause eBGP neighbor sessions to be dropped, leading to a DoS condition in the network.

Through the exploitation of active user sessions, an attacker could send custom requests to cause a denial-of-service condition on the device.

Discourse is a platform for community discussion. The message serializer uses the full list of expanded chat mentions (@all and @here) which can lead to a very long array of users. This issue was patched in versions 3.1.4 and beta 3.2.0.beta5.

Squid is vulnerable to Denial of Service, where a remote attacker can perform DoS by sending ftp:// URLs in HTTP Request messages or constructing ftp:// URLs from FTP Native input.

Squid is vulnerable to a Denial of Service, where a remote attacker can perform buffer overflow attack by writing up to 2 MB of arbitrary data to heap memory when Squid is configured to accept HTTP Digest Authentication.

Werkzeug is a comprehensive WSGI web application library. If an upload of a file that starts with CR or LF and then is followed by megabytes of data without these characters: all of these bytes are appended chunk by chunk into internal bytearray and lookup for boundary is performed on growing buffer. This allows an attacker to cause a denial of service by sending crafted multipart data to an endpoint that will parse it. The amount of CPU time required can block worker processes from handling legitimate requests. This vulnerability has been patched in version 3.0.1.

get-func-name is a module to retrieve a function's name securely and consistently both in NodeJS and the browser. Versions prior to 2.0.1 are subject to a regular expression denial of service (redos) vulnerability which may lead to a denial of service when parsing malicious input. This vulnerability can be exploited when there is an imbalance in parentheses, which results in excessive backtracking and subsequently increases the CPU load and processing time significantly. This vulnerability can be triggered using the following input: '\t'.repeat(54773) + '\t/function/i'. This issue has been addressed in commit `f934b228b` which has been included in releases from 2.0.1. Users are advised to upgrade. There are no known workarounds for this vulnerability.

Apache Airflow, in versions prior to 2.7.0, contains a security vulnerability that can be exploited by an authenticated user possessing Connection edit privileges. This vulnerability allows the user to access connection information and exploit the test connection feature by sending many requests, leading to a denial of service (DoS) condition on the server. Furthermore, malicious actors can leverage this vulnerability to establish harmful connections with the server. Users of Apache Airflow are strongly advised to upgrade to version 2.7.0 or newer to mitigate the risk associated with this vulnerability. Additionally, administrators are encouraged to review and adjust user permissions to restrict access to sensitive functionalities, reducing the attack surface.

Vulnerability discovered is related to the peer-to-peer (p2p) communications, attackers can craft consensus messages, send it to individual nodes and take them offline. An attacker can crawl the network peers using getaddr message and attack the unpatched nodes.

Rocket Software UniData versions prior to 8.2.4 build 3003 and UniVerse versions prior to 11.3.5 build 1001 or 12.2.1 build 2002 suffer from a memory-exhaustion issue, where a decompression routine will allocate increasing amounts of memory until all system memory is exhausted and the forked process crashes.

Boxo, formerly known as go-libipfs, is a library for building IPFS applications and implementations. In versions 0.4.0 and 0.5.0, if an attacker is able allocate arbitrary many bytes in the Bitswap server, those allocations are lasting even if the connection is closed. This affects users accepting untrusted connections with the Bitswap server and also affects users using the old API stubs at `github.com/ipfs/go-libipfs/bitswap` because users then transitively import `github.com/ipfs/go-libipfs/bitswap/server`. Boxo versions 0.6.0 and 0.4.1 contain a patch for this issue. As a workaround, those who are using the stub object at `github.com/ipfs/go-libipfs/bitswap` not taking advantage of the features provided by the server can refactor their code to use the new split API that will allow them to run in a client only mode: `github.com/ipfs/go-libipfs/bitswap/client`.

Switcher Client is a JavaScript SDK to work with Switcher API which is cloud-based Feature Flag. Unsanitized input flows into Strategy match operation (EXIST), where it is used to build a regular expression. This may result in a Regular expression Denial of Service attack (reDOS). This issue has been patched in version 3.1.4. As a workaround, avoid using Strategy settings that use REGEX in conjunction with EXIST and NOT_EXIST operations.

Windows Lightweight Directory Access Protocol (LDAP) Denial of Service Vulnerability

A vulnerability in an API endpoint of multiple Cisco Unified Communications Products could allow an unauthenticated, remote attacker to cause high CPU utilization, which could impact access to the web-based management interface and cause delays with call processing. This API is not used for device management and is unlikely to be used in normal operations of the device. This vulnerability is due to improper API authentication and incomplete validation of the API request. An attacker could exploit this vulnerability by sending a crafted HTTP request to a specific API on the device. A successful exploit could allow the attacker to cause a denial of service (DoS) condition due to high CPU utilization, which could negatively impact user traffic and management access. When the attack stops, the device will recover without manual intervention.

A vulnerability in the networking component of Cisco access point (AP) software could allow an unauthenticated, remote attacker to cause a temporary disruption of service. This vulnerability is due to overuse of AP resources. An attacker could exploit this vulnerability by connecting to an AP on an affected device as a wireless client and sending a high rate of traffic over an extended period of time. A successful exploit could allow the attacker to cause the Datagram TLS (DTLS) session to tear down and reset, causing a denial of service (DoS) condition.

Buffer Overflow vulnerability in Control de Ciber version 1.650, in the printing function. Sending a modified request by the attacker could cause a Buffer Overflow when the adminitrator tries to accept or delete the print query created by the request.

Control de Ciber, in its 1.650 version, is affected by a Denial of Service condition through the version function. Sending a malicious request could cause the server to check if an unrecognized component is up to date, causing a memory failure error that shuts down the process.

Binary provides encoding/decoding in Borsh and other formats. The vulnerability is a memory allocation vulnerability that can be exploited to allocate slices in memory with (arbitrary) excessive size value, which can either exhaust available memory or crash the whole program. When using `github.com/gagliardetto/binary` to parse unchecked (or wrong type of) data from untrusted sources of input (e.g. the blockchain) into slices, it's possible to allocate memory with excessive size. When `dec.Decode(&val)` method is used to parse data into a structure that is or contains slices of values, the length of the slice was previously read directly from the data itself without any checks on the size of it, and then a slice was allocated. This could lead to an overflow and an allocation of memory with excessive size value. Users should upgrade to `v0.7.1` or higher. A workaround is not to rely on the `dec.Decode(&val)` function to parse the data, but to use a custom `UnmarshalWithDecoder()` method that reads and checks the length of any slice.

ManageEngine Password Manager Pro 12100 and prior and OPManager 126100 and prior are vulnerable to unauthorized file and directory creation on a server machine.

The Multipass service was found to have code paths that could be abused to cause a denial of service for authentication or authorization operations. A malicious attacker could perform an application-level denial of service attack, potentially causing authentication and/or authorization operations to fail for the duration of the attack. This could lead to performance degradation or login failures for customer Palantir Foundry environments. This vulnerability is resolved in Multipass 3.647.0. This issue affects: Palantir Foundry Multipass versions prior to 3.647.0.

Certain General Electric Renewable Energy products allow attackers to use a code to trigger a reboot into the factory default configuration. This affects iNET and iNET II before 8.3.0, SD before 6.4.7, TD220X before 2.0.16, and TD220MAX before 1.2.6.

IBM AIX 7.1, 7.2, 7.3, and VIOS 3.1 could allow a non-privileged trusted host user to exploit a vulnerability in the nimsh daemon to cause a denial of service in the nimsh daemon on another trusted host. IBM X-Force ID: 220396

CAMS for HIS Log Server contained in the following Yokogawa Electric products is vulnerable to uncontrolled resource consumption. CENTUM CS 3000 versions from R3.08.10 to R3.09.00, CENTUM VP versions from R4.01.00 to R4.03.00, from R5.01.00 to R5.04.20, from R6.01.00 to R6.08.00, Exaopc versions from R3.72.00 to R3.79.00.

A vulnerability in the UDP processing functionality of Cisco IOS XE Software for Embedded Wireless Controllers on Catalyst 9100 Series Access Points could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of UDP datagrams. An attacker could exploit this vulnerability by sending malicious UDP datagrams to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.

A vulnerability in the DHCP processing functionality of Cisco IOS XE Wireless Controller Software for the Catalyst 9000 Family could allow an unauthenticated, remote attacker to cause a denial of service (DoS) condition. This vulnerability is due to the improper processing of DHCP messages. An attacker could exploit this vulnerability by sending malicious DHCP messages to an affected device. A successful exploit could allow the attacker to cause the device to reload, resulting in a DoS condition.