Flatpak : Security Vulnerabilities, CVEs,

Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. in versions before 1.10.9, 1.12.9, 1.14.6, and 1.15.8, a malicious or compromised Flatpak app could execute arbitrary code outside its sandbox. Normally, the `--command` argument of `flatpak run` expects to be given a command to run in the specified Flatpak app, optionally along with some arguments. However it is possible to instead pass `bwrap` arguments to `--command=`, such as `--bind`. It's possible to pass an arbitrary `commandline` to the portal interface `org.freedesktop.portal.Background.RequestBackground` from within a Flatpak app. When this is converted into a `--command` and arguments, it achieves the same effect of passing arguments directly to `bwrap`, and thus can be used for a sandbox escape. The solution is to pass the `--` argument to `bwrap`, which makes it stop processing options. This has been supported since bubblewrap 0.3.0. All supported versions of Flatpak require at least that version of bubblewrap. xdg-desktop-portal version 1.18.4 will mitigate this vulnerability by only allowing Flatpak apps to create .desktop files for commands that do not start with --. The vulnerability is patched in 1.15.8, 1.10.9, 1.12.9, and 1.14.6.

Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. In versions prior to 1.10.8, 1.12.8, 1.14.4, and 1.15.4, if an attacker publishes a Flatpak app with elevated permissions, they can hide those permissions from users of the `flatpak(1)` command-line interface by setting other permissions to crafted values that contain non-printable control characters such as `ESC`. A fix is available in versions 1.10.8, 1.12.8, 1.14.4, and 1.15.4. As a workaround, use a GUI like GNOME Software rather than the command-line interface, or only install apps whose maintainers you trust.

Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. Versions prior to 1.10.8, 1.12.8, 1.14.4, and 1.15.4 contain a vulnerability similar to CVE-2017-5226, but using the `TIOCLINUX` ioctl command instead of `TIOCSTI`. If a Flatpak app is run on a Linux virtual console such as `/dev/tty1`, it can copy text from the virtual console and paste it into the command buffer, from which the command might be run after the Flatpak app has exited. Ordinary graphical terminal emulators like xterm, gnome-terminal and Konsole are unaffected. This vulnerability is specific to the Linux virtual consoles `/dev/tty1`, `/dev/tty2` and so on. A patch is available in versions 1.10.8, 1.12.8, 1.14.4, and 1.15.4. As a workaround, don't run Flatpak on a Linux virtual console. Flatpak is primarily designed to be used in a Wayland or X11 graphical environment.

Flatpak is a Linux application sandboxing and distribution framework. A path traversal vulnerability affects versions of Flatpak prior to 1.12.3 and 1.10.6. flatpak-builder applies `finish-args` last in the build. At this point the build directory will have the full access that is specified in the manifest, so running `flatpak build` against it will gain those permissions. Normally this will not be done, so this is not problem. However, if `--mirror-screenshots-url` is specified, then flatpak-builder will launch `flatpak build --nofilesystem=host appstream-utils mirror-screenshots` after finalization, which can lead to issues even with the `--nofilesystem=host` protection. In normal use, the only issue is that these empty directories can be created wherever the user has write permissions. However, a malicious application could replace the `appstream-util` binary and potentially do something more hostile. This has been resolved in Flatpak 1.12.3 and 1.10.6 by changing the behaviour of `--nofilesystem=home` and `--nofilesystem=host`.

Flatpak is a Linux application sandboxing and distribution framework. Prior to versions 1.12.3 and 1.10.6, Flatpak doesn't properly validate that the permissions displayed to the user for an app at install time match the actual permissions granted to the app at runtime, in the case that there's a null byte in the metadata file of an app. Therefore apps can grant themselves permissions without the consent of the user. Flatpak shows permissions to the user during install by reading them from the "xa.metadata" key in the commit metadata. This cannot contain a null terminator, because it is an untrusted GVariant. Flatpak compares these permissions to the *actual* metadata, from the "metadata" file to ensure it wasn't lied to. However, the actual metadata contents are loaded in several places where they are read as simple C-style strings. That means that, if the metadata file includes a null terminator, only the content of the file from *before* the terminator gets compared to xa.metadata. Thus, any permissions that appear in the metadata file after a null terminator are applied at runtime but not shown to the user. So maliciously crafted apps can give themselves hidden permissions. Users who have Flatpaks installed from untrusted sources are at risk in case the Flatpak has a maliciously crafted metadata file, either initially or in an update. This issue is patched in versions 1.12.3 and 1.10.6. As a workaround, users can manually check the permissions of installed apps by checking the metadata file or the xa.metadata key on the commit metadata.

Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. In versions prior to 1.10.4 and 1.12.0, Flatpak apps with direct access to AF_UNIX sockets such as those used by Wayland, Pipewire or pipewire-pulse can trick portals and other host-OS services into treating the Flatpak app as though it was an ordinary, non-sandboxed host-OS process. They can do this by manipulating the VFS using recent mount-related syscalls that are not blocked by Flatpak's denylist seccomp filter, in order to substitute a crafted `/.flatpak-info` or make that file disappear entirely. Flatpak apps that act as clients for AF_UNIX sockets such as those used by Wayland, Pipewire or pipewire-pulse can escalate the privileges that the corresponding services will believe the Flatpak app has. Note that protocols that operate entirely over the D-Bus session bus (user bus), system bus or accessibility bus are not affected by this. This is due to the use of a proxy process `xdg-dbus-proxy`, whose VFS cannot be manipulated by the Flatpak app, when interacting with these buses. Patches exist for versions 1.10.4 and 1.12.0, and as of time of publication, a patch for version 1.8.2 is being planned. There are no workarounds aside from upgrading to a patched version.

Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. In Flatpack since version 0.9.4 and before version 1.10.2 has a vulnerability in the "file forwarding" feature which can be used by an attacker to gain access to files that would not ordinarily be allowed by the app's permissions. By putting the special tokens `@@` and/or `@@u` in the Exec field of a Flatpak app's .desktop file, a malicious app publisher can trick flatpak into behaving as though the user had chosen to open a target file with their Flatpak app, which automatically makes that file available to the Flatpak app. This is fixed in version 1.10.2. A minimal solution is the first commit "`Disallow @@ and @@U usage in desktop files`". The follow-up commits "`dir: Reserve the whole @@ prefix`" and "`dir: Refuse to export .desktop files with suspicious uses of @@ tokens`" are recommended, but not strictly required. As a workaround, avoid installing Flatpak apps from untrusted sources, or check the contents of the exported `.desktop` files in `exports/share/applications/*.desktop` (typically `~/.local/share/flatpak/exports/share/applications/*.desktop` and `/var/lib/flatpak/exports/share/applications/*.desktop`) to make sure that literal filenames do not follow `@@` or `@@u`.

Flatpak is a system for building, distributing, and running sandboxed desktop applications on Linux. A bug was discovered in the `flatpak-portal` service that can allow sandboxed applications to execute arbitrary code on the host system (a sandbox escape). This sandbox-escape bug is present in versions from 0.11.4 and before fixed versions 1.8.5 and 1.10.0. The Flatpak portal D-Bus service (`flatpak-portal`, also known by its D-Bus service name `org.freedesktop.portal.Flatpak`) allows apps in a Flatpak sandbox to launch their own subprocesses in a new sandbox instance, either with the same security settings as the caller or with more restrictive security settings. For example, this is used in Flatpak-packaged web browsers such as Chromium to launch subprocesses that will process untrusted web content, and give those subprocesses a more restrictive sandbox than the browser itself. In vulnerable versions, the Flatpak portal service passes caller-specified environment variables to non-sandboxed processes on the host system, and in particular to the `flatpak run` command that is used to launch the new sandbox instance. A malicious or compromised Flatpak app could set environment variables that are trusted by the `flatpak run` command, and use them to execute arbitrary code that is not in a sandbox. As a workaround, this vulnerability can be mitigated by preventing the `flatpak-portal` service from starting, but that mitigation will prevent many Flatpak apps from working correctly. This is fixed in versions 1.8.5 and 1.10.0.

Flatpak before 1.0.8, 1.1.x and 1.2.x before 1.2.4, and 1.3.x before 1.3.1 allows a sandbox bypass. Flatpak versions since 0.8.1 address CVE-2017-5226 by using a seccomp filter to prevent sandboxed apps from using the TIOCSTI ioctl, which could otherwise be used to inject commands into the controlling terminal so that they would be executed outside the sandbox after the sandboxed app exits. This fix was incomplete: on 64-bit platforms, the seccomp filter could be bypassed by an ioctl request number that has TIOCSTI in its 32 least significant bits and an arbitrary nonzero value in its 32 most significant bits, which the Linux kernel would treat as equivalent to TIOCSTI.

Flatpak before 1.0.7, and 1.1.x and 1.2.x before 1.2.3, exposes /proc in the apply_extra script sandbox, which allows attackers to modify a host-side executable file.

In dbus-proxy/flatpak-proxy.c in Flatpak before 0.8.9, and 0.9.x and 0.10.x before 0.10.3, crafted D-Bus messages to the host can be used to break out of the sandbox, because whitespace handling in the proxy is not identical to whitespace handling in the daemon.

In Flatpak before 0.8.7, a third-party app repository could include malicious apps that contain files with inappropriate permissions, for example setuid or world-writable. The files are deployed with those permissions, which would let a local attacker run the setuid executable or write to the world-writable location. In the case of the "system helper" component, files deployed as part of the app are owned by root, so in the worst case they could be setuid root.